One network cable connects 2 or more router methods

Set up the router, I believe everyone will, but the wireless router with a wireless router, there are several methods, I think the most useful, the most easy to operate practical methods have 2 kinds to everyone said:

Method One: It is very simple to use a network cable to boot from the first router to any port on the second router's LAN, and remember that you cannot plug into the WAN port. This method is generally used by more people, basically no technical content. So long as the first route is connected to the cat. Set up to be able to access the Internet can be used for a second router.

Method Two:

Use a network cable (the router's head to the LAN port) to connect the computer that needs the Internet to the second router, then open the router we want to use, after entering the "network parameters", and some routers inside is "network Settings", after the point of "Wan port Settings", and then the right to the WAN port connection type to " Dynamic IP "

Then click LAN port Settings, change the IP address on the right to 192.168.2.1, and click Save.

Then dot "MAC address cloning", generally this everyone will ignore. But I do not recommend friends or cloning is better, that is, the router's IP with their own computer IP bundle, so that the Internet will be faster, do not have to let the router to identify your computer network card.

Finally reboot the router, OK.

Hope to some friends useful, novice summary, master do not disturb.