U disk Format: Open u disk when prompted the U disk need to format how?
We sometimes open u disk prompts you need to format the reason is generally because of logic errors caused, generally speaking, u disk is not damaged, only the use of U disk is not correct or operation error, such as we do not click on the lower right corner of the computer pop-up U disk, stop using U disk equipment directly pulled down the U This can happen if you are reading and writing data at this time. In addition, when you are using a U disk, Computer accidental power off shutdown will cause this fault.
This fault is not difficult to solve, is generally the use of software on the U disk to guide data recovery
This article will teach you how to use a powerful hard disk operation software software to restore the boot data of U disk, solve this U disk need to format the fault, (although it is hard disk operation software, but U disk is also a kind of hard drive.) This software can be applied to u disk completely.
Download Diskgenius This software to rebuild the partition table, the operation specific process link is as follows.
1, plug in a faulty U disk (make sure U disk is already recognized on the computer)
2, open the Diskgenius program,
3, the following diagram interface to select the letter U disk, select "Search for lost Partitions (Rebuild partition Table)"
(Related article: U disk cannot be formatted how to do: Memory card cannot format how to solve)
4, after rebuilding the partition table, select Rebuild Master boot record. (Here are some advanced point of the U disk has hidden partitions, if not restored is also unusable)
And then from the lower right corner of the computer safely remove the hardware to the U disk device to stop after the U disk, the U disk plug in the computer again, this can be normal application.
This article is to some improper operation U disk, or an accidental power off caused by inserting a U disk when you need a format failure solution, I hope to help you.