Openfiler installation here is skipped.
1, enter http://IP:446 in the Web page to open Openfiler, to log in. Default account: Openfiler Password: password
2, in the Volumes option, select Volume Groups, view volume information (two independent disks can be directly created volume, if the physical machine do array division Lum need to be manually divided into the system, Specific settings Please see a: Openfiler Physical machine Web interface cannot create physical volume (physical volume) problem.
3. Add Volume click Add Volume, scroll to the bottom, and divide the shared disk size.
4, in the management volume (manager Volumes), review the add situation, the following instructions can be used normally.
5. System Setup, add local iSCSI address settings and allow iSCSI fan address.
6. Open iSCSI Traget Service, otherwise iSCSI Traget cannot be added.
7. iSCSI Tragets Settings in the volumes option
The result after adding:
To set Lum mapping, select the write-thru,transfer mode option in the R/W mode key selection Blockio Click Map to submit:
To set the network ACL entry:
Openfiler Setup is complete.
8. Set up VMware ESXi connection Openfiler
Select Add Host to add the Openfiler address in the storage adapter in the configuration
（上面步骤完成后，第一次添加openfiler存储需要手动添加，在存储器——添加存储器直接下一步，设置存储标识（自定义命名），继续下一步直至完成。其他主机添加时，不需要手动添加，存储扫描完后会自动添加。）
So the steps are complete;
Openfiler setting up and adding VMware ESXI
