overcharge protection, overcharge recovery, over-discharge protection, over-discharge recovery

In the case of Chip dw01a (Lithium battery protection ICS)
Overcharge detection voltage (overcharge threshold voltage) (Overcharge protection voltage) (4.28V): When the battery is charged, the voltage from low to high reaches 4.28V, the overcharge protection function starts, stops charging
Overcharge release voltage (overcharge recovery voltage) (over-charge recovery voltage) (4.08V): When the battery is not charged, the voltage will drop a certain amplitude, and when the battery voltage drops (4.08V), the lithium battery can be recharged.
Over-discharge detection voltage (over-discharge threshold voltage) (over-discharge protection voltage) (2.40V): When the battery discharges to this voltage point (2.40V), the protection circuit shuts off the circuit, achieves the purpose of protecting the battery
Over-discharge release voltage (over-discharge recovery voltage) (over-discharge recovery voltage) (3.00V): After the battery over-discharge protection, the voltage will slowly recover, to reach the recovery voltage point (3.00V), the circuit re-connect;
The general over-discharge recovery voltage is higher than the over-discharge protection voltage;