PE blue screen What causes

When the system error when we are generally used to repair the WinPE, but sometimes into WinPE will appear blue screen phenomenon, what is the cause of the BSOD? To tell you a few things:

A: c000007b display hardware errors should be related to your green leaf hard disk Interface compatibility mode has a relationship you just need to enter the BIOS set up the compatibility mode of the hard disk interface should be able to solve the problem should be changed to SATA mode you might as well try it, just set the BIOS should be no problem

Second: ◇ Error Analysis: Windows cannot access the system partition or boot volume during startup. This usually occurs when the motherboard is first started, mainly because the new motherboard and the IDE controller of the old motherboard are caused by using different chipsets. It can sometimes be caused by a virus or hard disk damage.

◇ Solution: Generally just use the installation CD to start the computer, and then perform a repair installation to solve the problem. For viruses, you can use the DOS version of Anti-virus software for Avira (with Kv2005dos version download). If there is a problem with the hard disk itself, install it on a different computer, and then use "CHKDSK/R" to check for and repair the disk error.

Three: This is the Microsoft official website above the solution method

1. Make sure your system installation disk is intact and clean

2. If you have more than one optical drive, please try another