The Charm Blue Note adopts the integrated fuselage design, the card slot is located on the right side of the fuselage, needs to use the Kari that takes out the card slot, then completes the SIM card installment. Therefore, the Charm Blue Note installs the SIM card the first step, is uses the card needle to remove the card slot, as shown in the following figure.
Charm Blue Note Using a single card slot dual design, close to the internal card slot for SIM2, near the external card slot for the SIM1, in the installation of a single card or dual SIM card, you need to follow the following SIM cards installation methods.
Phantom Blue Note Mobile or Unicom version of the installation of SIM card method as shown below:
* Note: SIM1 support 4G/3G/2G Network, SIM2 only support mobile/Unicom 2G network, so if you are installing Tanka, please note that the SIM card is installed near the external SIM1.
Charm Blue Note Dual card installation steps:
1, first put the SIM2 into the Cato;
2, then the Cato push card trough 1/2, and then put the SIM1 into the Cato;
3, the last full push, complete the SIM card installation, as shown in the following figure.