The material picture is somewhat backlight, but the light source is not obvious enough, when processing can render some warm color high light in the light source position more, then the dark part and the corner area greatly presses the dark, and adjusts the blue;
Original
Final effect
1, open the original material large map, create an optional color adjustment layer, yellow, green, neutral color adjustment, parameter settings such as Figure 1-3, the effect is shown in Figure 4. This step mainly turns the green in the picture to Green, and darkens a little.
< map 1>
< map 2>
< map 3>
< map 4>
2, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 5>
3, create an optional color adjustment layer, yellow, green, green, black to adjust, parameter settings such as Figure 6-9, the effect is shown in Figure 10. This step mainly turns the yellow-green in the picture into tawny, and increases the cyan.
< map 6>
< map 7>
< map 8>
< map 9>
< map 10>
4, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.
< map 11>
Classification: