The material picture is a bit darker, the picture is not soft enough. Color blending can be yellow and green separately, green to neutral cyan, yellow to orange yellow, and then the rendering of high light, and then the overall treatment soft.
Original
Final effect
1, open the original material large map, create an optional color adjustment layer, green, neutral color adjustment, parameters and effects of the following figure. This step darkens the green in the picture and turns it green.
< map 1>
< map 2>
< map 3>
2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.
< map 4>
3, the creation of optional color adjustment layer, yellow, green and green adjustment, parameter settings such as Figure 5-7, the effect is shown in Figure 8. This step mainly turns yellow into orange yellow in the picture.
< map 5>
< map 6>
< map 7>
< map 8>
4, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 9>
5, create hue/saturation adjustment layer, the yellow, green adjustment, parameters and effects of the following figure. This step mainly turns the green in the picture to neutral color.
< map 10>
< map 11>
< map 12>
6, create curve adjustment layer, the RGB channel adjustment, the dark part slightly darkened a little, highlight a little, parameters and effect of the following figure.
< map 13>
< map 14>
7, create an optional color adjustment layer, red, yellow, green, white, black to adjust, parameter settings such as Figure 15-19, the effect is shown in Figure 20. This step is to light up the warm tones in the picture and fine-tune the light and dark colors.
< map 15>
< map 16>
< map 17>
< map 18>
< map 19>
< map 20>
8, create a color balance adjustment layer, the shadow adjustment, parameters and effects of the following figure. This step adds a warm color to the dark part of the picture.
< map 21>
< map 22>
Classification: