Photoshop adds a strong autumn color to the exterior beauty of an umbrella

The effect is mainly warm color, color palette can be the material in the yellow-green to orange red, and then some neutral color, dark, highlight the colors are turned to light cool.

Original

Final effect

1, open the material picture, create hue/saturation adjustment layer, yellow, blue adjustment, parameter settings such as Figure 1, 2, after the layer opacity to: 50%, the effect is as Figure 3. This step turns the yellow-green in the picture into orange-yellow.

< map 1>

< map 2>

< map 3>

2. Press CTRL + J to copy the current hue/saturation adjustment layer and change the opacity to: 60%, the effect is as follows.

< map 4>

3, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 5-8, the effect is shown in Figure 9. This step is mainly to increase the dark part of the picture blue, the high light part of the increase in light yellow.

< map 5>

< map 6>

< map 7>

< map 8>

< map 9>

4, create color balance adjustment layer, shadow, highlight adjustment, parameter settings such as Figure 10,11, the effect is shown in Figure 12. This step strengthens the picture's dark part and the high light color.

< map 10>

< map 11>

< map 12>

5, create a new layer, press the letter key "D" before the background color to restore to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode changed to "Color", the opacity to: 80%. Add a layer mask and use a black brush to erase the bottom area, as shown below.

< map 13>

6, create curve adjustment layer, RGB and blue channel adjustment, parameters and effect of the following figure. This step increases the picture light and shade contrast and adds blue to the picture.

< map 14>

< map 15>

7, create hue/saturation adjustment layer, the yellow, blue adjustment, parameters and effects as shown below. This step is mainly to add orange color to the picture.

< map 16>

< map 17>

< map 18>

8, create an optional color adjustment layer, the blue, magenta adjustment, parameter settings such as Figure 19,20, the effect is shown in Figure 21. This step is to fine-tune the cool colors in the picture.

< map 19>

< map 20>

< map 21>

9, press CTRL + ALT + 2 to pull up the high light selection, press CTRL + Shift + I to select, create curve adjustment layer, RGB, blue channel adjustment, parameters and effect as shown below. This step mainly to the dark color of the picture deepened.

< map 22>

< map 23>

10, create brightness/contrast adjustment layer, increase contrast, parameter settings such as Figure 24, after the mask filled with black, white brush to wipe out the face of the characters, the effect is shown in Figure 25.

< map 24>

< map 25>

11, create an optional color adjustment layer, the yellow, white adjustment, parameters and effects of the following figure. This step mainly adds light blue to the picture's High light section.

< map 26>

< map 27>

< map 28>

12, create a solid color adjustment layer, the color is set to orange yellow: #F9E38D, after the mask filled with black, with a white brush to the upper left corner of the section, the effect of the following figure.

< map 29>

13, press CTRL + J to copy the current solid color adjustment layer, blending mode to "color filter", the effect is as follows.

< map 30>

14, create a new layer, press CTRL + ALT + Shift + E-stamped layer, select menu: Filter > Blur > Motion blur, Angle set to 45 degrees, distance set to 160, after the blending mode to "soft light", the effect of the following figure.

< map 31>

15. Use the Lasso tool to select the area shown in the following figure, feather 50 pixels and press CTRL + J to copy to the new layer, the effect is shown below.

< map 32>

16, create brightness/Contrast adjustment layer, the appropriate increase of contrast, parameters and effects of the following figure.

< map 33>

< map 34>

17, create a color balance adjustment layer, the shadow, highlight adjustments, parameters and effects of the following figure. This step adds blue to the picture.

< map 35>

< map 36>

< map 37>

Finally, fine-tune the overall color, complete the final effect.

Category:

• PS Image Processing