To the users of Photoshop software to explain the detailed interpretation of the use of brush tools to design ink ring production tutorials.
1, open PS software, press CTRL + N new document, Size: 1500 * 1500 pixels, resolution 72, background selection White, the following figure.
2. Select the Brush tool, press F5 to pull up the Brush preset panel, and now set the parameters.
Brush tip shape: Select the 27th brush, can not find a reset brush, size set 30 pixels, spacing set to 21%, the following figure.
Shape Dynamics: Size jitter set to 100%, other settings as shown below.
Double brushes: Select the 45th brush and other settings as shown below.
Delivery: Other version is also called other dynamic, opacity jitter settings 18%, Flow jitter set 3%, other settings as shown below, and then check the following "Smooth" option.
3, set the foreground color to black, brush size set to 150 pixels, opacity set to 10%, Flow 100%, the following figure.
4, a new blank layer, the following figure.
5, first from the right to start the smear, the right side of the beginning, more thick, the left side are fine strokes.
6, a piece of slowly smear, control a good overall height. If you do not grasp a good painting, you can create a new layer slowly draw.
7, the bottom of the transparent layer, the opacity setting is lower, there is a sense of layering, coating a faint effect, the left part of the first do not be quick to paint.
8, now start to increase the color, the brush opacity set to 30%, the following figure.
9, control the brush size, the right side of the body painted black, the following figure.
10, now to smear the left side, the brush set to 60 pixels around, the following figure.
11, start drawing the left side of the details, a piece of painting, you can adjust the size of the brush.
12, the left part of the temporary do not need to draw too thin, the following will be refined.
13, now put the whole dark point, you can adjust the size and opacity of the brush.
14, the edge can retain some of the transparency area, the middle part of the black, the following figure.
15, now to increase the middle of the gap; set the brush size to 30 pixels, the foreground color to white, and the brush opacity to 50%, as shown below.
16, in want to increase the gap of the smear, increase the white scratches.
17, right and left to increase the scratches, you can adjust the size of the brush, their own slowly refinement.
18, after the general drawing, we will deal with the edge, select the Smudge tool, strength set to 20%, the following figure.
19. Smear some of the scattered edges slightly.
20, the effect of the general treatment of the following figure.
21, reduce the canvas, press CTRL + A, press CTRL + X to cut, and then press CTRL + V to paste to make sure the ink part is in the middle of the canvas.
22, select Menu: Filter > Twist > Polar coordinates.
23, we select "plane coordinates to polar coordinates", the following figure, and then determine the results shown in Figure 28. If the ink is not in the middle position, the circular arc is not very round.
Well, the above information is small compiled to you photoshop this software users brought to the detailed use of brush tool design ink ring of the production of a tutorial to analyze the entire content of sharing, you see the users here, in general, the main thing is to use the brush tool to draw the ink style of the line, The tutorial detailed explains the drawing tool the setting, draws the straight line the ink painting pen, the circle as long as uses extremely sits extremely to be possible, everybody now quickly goes to follow the tutorial oneself to try to make under.
