Material picture contains a lot of green, but the warm part is not obvious enough, you can first add orange to the picture, keep the dark part of the green, and then the overall dimming can be.
Original
Final effect
1, open the material picture, create an optional color adjustment layer, yellow, green, white, black adjustment, parameter settings such as Figure 1-4, the effect is shown in Figure 5. This step adds brown to the picture.
< map 1>
< map 2>
< map 3>
< map 4>
< map 5>
2, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 50%, the effect of the following figure.
< map 6>
3, create curve adjustment layer, the RGB, red, blue channel adjustment, parameters and effect of the following figure. This step lightens the picture slightly and increases the light yellow.
< map 7>
< map 8>
4, press CTRL + ALT + 2 to bring up the high light selection, create a solid color adjustment layer, the color is set to orange yellow: #D9B88B, to determine the blending mode to "soft light", the opacity to: 50%, the following figure. This step adds light yellow to the picture.
< map 9>
5, create an optional color adjustment layer, red, yellow, green, white, neutral color adjustment, parameter settings such as Figure 10-14, the effect is shown in Figure 15. This step adds a light red to the picture.
< map 10>
< map 11>
< map 12>
< map 13>
< map 14>
< map 15>
6, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 16>
7, create curve adjustment layer, RGB, red, blue channel adjustment, parameter settings such as Figure 17-19, the effect is shown in Figure 20. This step is mainly to reduce the dark color of the picture.
< map 17>
< map 18>
< map 19>
< map 20> categories: