Photoshop creates sweet, neutral, light blue exterior beauty pictures

The color rendering is mainly divided into two parts, first, reduce the whole graph and primary color saturation to get the preliminary neutral picture, then use the curve and other color tools to add a little blue to the picture to get the desired main color.

Original

Final effect

1, open the material picture, create hue/saturation adjustment layer, the whole map, yellow, green adjustment, parameter settings such as Figure 1-3, the effect is shown in Figure 4. This step quickly turns the main color of the picture into a neutral color.

< map 1>

< map 2>

< map 3>

< map 4>

2. Press CTRL + J to copy the current hue/saturation adjustment layer and change the opacity to: 20%, the effect is as follows.

< map 5>

3, create curve adjustment layer, the blue channel adjustment, parameters and effect of the following figure. This step adds blue to the dark part of the picture.

< map 6>

< map 7>

4, press CTRL + ALT + 2 to bring up the high light selection, create a solid color adjustment layer, color set to light blue: #CCC8D8, to determine the blending mode changed to "soft light", the effect of the following figure. This step adds a light blue to the picture's high light portion.

< map 8>

5, press CTRL + J to copy the current solid color adjustment layer, the opacity to: 50%, the effect of the following figure.

< map 9>

6, create optional color adjustment layer, dialogue, neutral, black to adjust, parameter settings such as Figure 10-12, the effect is shown in Figure 13. This step adds blue purple to the picture.

< map 10>

< map 11>

< map 12>

< map 13>

7, create an optional color adjustment layer, red, yellow, blue, Yang hongying adjustment, parameter settings such as Figure 14-17, the effect is shown in Figure 18. This step adds light red to the picture and tunes the cool colors in the picture.

< map 14>

< map 15>

< map 16>

< map 17>

< map 18>

8, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.

< map 19>

9, create curve adjustment layer, the blue channel fine-tuning, to the high light part of a little light blue, parameters and effect of the following figure.

< map 20>

< map 21>

10, create a new layer, press the letter key "D" before the background color to restore to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode changed to "Color", the opacity to: 20%. Then add the layer mask and use a black brush to erase the bottom area, as shown below.

< map 22>

11, the background layer to copy a layer, press CTRL + SHIFT +] top, press CTRL + SHIFT + U go color, and then change the blending mode to "multiply", the opacity to: 30%. Hold down the ALT key to add a layer mask and use a white brush to erase the part of the person that is exposed, as shown below.

< map 23>

12, the creation of optional color adjustment layer, blue, Yang Red to adjust, parameters and effects of the following figure. This step is mainly the blue tone in the picture a little bit.

< map 24>

< map 25>

< map 26>

13, create a solid color adjustment layer, color set to light blue: #C5C4D6, to determine the mask filled with black, with a white brush to the upper left corner of the section, the effect of the following figure. This step adds a light blue high light to the picture.

< map 27>

14, press CTRL + J to copy the current solid color adjustment layer, blending mode to "soft light", the opacity to: 50%, the effect of the following figure.

< map 28>

15, create a new layer, press CTRL + ALT + Shift + E-stamped layer, select menu: Filter > Blur > Motion blur, Angle set to 45 degrees, distance set to 160, after the blending mode to "soft light", opacity to: 30%, and then strengthen the local tone, The effect is shown below.

< map 29>

Finally, fine-tune the overall color, and then to the characters to rub skin, complete the final effect.

Category:

• PS Image Processing