The color of the material picture is a bit messy, when mixing green and cyan into light green, yellow to orange, then strengthen the color of high light and dark, then the whole soft treatment can be.
Original
Final effect
1, open the original material large image, create an optional color adjustment layer, green adjustment, parameters and effect of the following figure. This step puts the green in the picture a little brighter.
< map 1>
< map 2>
2, the creation of optional color adjustment layer, red, yellow, green, green, white to adjust, parameter settings such as Figure 3-7, the effect is shown in Figure 8. This step mainly turns the cyan in the picture to green and yellow to orange.
< map 3>
< map 4>
< map 5>
< map 6>
< map 7>
< map 8>
3, press CTRL + J to copy the current optional color adjustment layer, the opacity to: 70%, the effect of the following figure.
< map 9>
4, press CTRL + ALT + 2 to call up the high light constituency, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, the RGB, green, blue channel adjustment, parameter settings such as Figure 10, the effect is shown in Figure 11, after the lower transparency of the soft side of the black brush to wipe the right middle area out , the effect is shown in Figure 11. This step darkens the dark part of the picture and adds Blue purple.
< map 10>
< map 11>
5, press CTRL + J to copy the current curve adjustment layer, press CTRL + ALT + G to create a clipping mask, the effect of the following figure.
< map 12>
6, create an optional color adjustment layer, the red, black adjustment, parameter settings such as Figure 13,14, after the creation of a clipping mask, the effect is shown in Figure 15. This step is to fine-tune the color of the dark part of the picture.
< map 13>
< map 14>
< map 15>
Classification: