Photoshop High Contrast green blue photo effect making tutorial

To give you Photoshop software users to elaborate on the high contrast of the blue photo effect of the production tutorial.

Tutorial Sharing:

Original

1, open the original material large map, create an optional color adjustment layer, yellow, green adjustment, parameter settings such as Figure 1, 2, the effect is as Figure 3. This step adds brown to the grass portion.

< map 1>

< map 2>

< map 3>

2, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, blue channel adjustment, parameters and effects as shown below. This step darkens the dark part slightly and increases the blue color.

< map 4>

< map 5>

3, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.

< map 6>

4, create a color balance adjustment layer, the shadow, midtones, high light adjustment, parameter settings such as Figure 7-9, determined to press CTRL + ALT + G to create a clipping mask, the effect is shown in Figure 10. This step adds cool colors to the dark area of the picture.

< map 7>

< map 8>

< map 9>

< map 10>

5, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 11,12, after the creation of a clipping mask, the effect is shown in Figure 13. This step also adds blue to the dark area of the picture.

< map 11>

< map 12>

< map 13>

6, press CTRL + ALT + 2 to bring up the highlights of the selection, and then create a curve adjustment layer, RGB, green, blue channel adjustment, parameter settings such as Figure 14-16, determined to use the soft side of the black brush to the bottom does not need to lighten the area, the effect is as Figure 17. This step brightens the sky and Horizon area and increases the light blue.

< map 14>

< map 15>

< map 16>

< map 17>

7, create a hue/saturation adjustment layer, the whole map adjustment, parameter settings such as Figure 18, the effect is shown in Figure 19. This step reduces the saturation of the entire graph.

< map 18>

< map 19>

8, create curve adjustment layer, RGB, green channel adjustment, parameters and effect of the following figure. This step darkens the dark part of the picture and reduces the green.

< map 20>

< map 21>

9, create a color balance adjustment layer, the shadow adjustment, parameter settings such as Figure 22, after the mask to fill the black, and then use the transparency of the lower soft white brush to wipe out the sky, the effect is as Figure 23. This step adds blue purple to the top area of the sky.

< map 22>

< map 23>

10, hold down CTRL + the left mouse button click on the layer board, the current channel thumbnail load mask selection, and then create a curve adjustment layer, RGB, green, blue channel adjustment, parameter settings such as Figure 24, the effect is shown in Figure 25. This step darkens the top of the sky a little bit.

< map 24>

< map 25>

11, the same method to bring up the current layer mask selection, and then create a hue/saturation adjustment layer, the entire map to adjust, the appropriate reduction of saturation, parameters and effects as shown below.

< map 26>

< map 27>

12, create a new layer, using Lasso tool to check out the selection shown in the following figure, feather 45 pixels after the fill of pale green: #E1EAE7, remove the selection after the blending mode to "soft light", the effect of the following figure.

< map 28>

13, press CTRL + J to copy the current layer, press CTRL + T a little smaller, determine the opacity to: 50%, the effect of the following figure.

< map 29>

14, press CTRL + J to copy the current layer, blending mode to "filter Color", the effect of the following figure.

< map 30>

15, press CTRL + LEFT mouse button click on the layer mask current layer thumbnail load selection, and then create a color balance adjustment layer, the high light adjustment, parameters and effects of the following figure. This step adds a light cyan to the middle of the picture.

< map 31>

< map 32>

16, create a new layer, press CTRL + ALT + Shift + E stamped layer, blur the sky area with fuzzy tool, the effect is as follows.

< map 33>

17, create a color balance adjustment layer, adjust the high light, parameter settings such as Figure 34, after the mask to fill the black, and then with the transparency of the lower soft edge white brush to wipe out the middle area, the effect is shown in Figure 35. This step adds green and yellow to the middle area.

< map 34>

< map 35>

18, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to pull out the characters, into the selection after adding layer mask, the effect of the following figure.

< map 36>

19, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 37, determined after the creation of clipping masks, the effect is shown in Figure 38. This step darkens the character part a little bit.

< map 37>

< map 38>

20, create hue/saturation adjustment layer, adjust the whole map, appropriate to reduce the brightness, parameter settings such as Figure 39, after the creation of a clipping mask, and then use the soft side of the black brush will not need to lighten the area to wipe out, the effect is shown in Figure 40.

< map 39>

< map 40>

21, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 41, determine after the creation of a clipping mask, and then the mask filled with black, and then use the transparency of the lower soft edge white brush the character backlight area, the effect is as Figure 42.

< map 41>

< map 42>

22, the character by the light area to lighten up a little, the local strengthening good, the effect of the following figure.

< map 43>

23, create curve adjustment layer, the RGB channel a little bit darker, parameter settings such as Figure 44, to determine after the mask filled with black, and then with the transparency of the lower soft white brush to the bottom of the need to darken the area to wipe out, the effect is shown in Figure 45.

< map 44>

< map 45>

24, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.

< map 46>

25, CTRL + ALT + 2 up the high light selection, and then create a curve adjustment layer, RGB, green channel adjustment, parameter settings such as Figure 47, the effect is as Figure 48. This step increases the brightness contrast of the high light area.

< map 47>

< map 48>

Finally fine-tune the color, strengthen the local light and finish the final effect.

Well, the above information is the full content of the detailed and high contrast blue photo effect of the software users of Photoshop, which has been created by you, in general, the main idea is to first the picture of the whole dark, and then pull out the cold tones, and then to the middle part of the photo rendering pale cyan , and then blur the sky area, increase the depth of field, and so on, everyone now go to their own test results.