Pololu servo controller, driver installation and GUI use (Ubuntu)

This 6-channel servo controller is very small, supports the serial port, there is an Arduino library, easy to use

PWM frequency can also be adjusted, as a good controller

driver installation, just download click to open link

The installation needs to go to the "Maestro-linux" folder and copy the "99-pololu.rules" file in the file to/etc/udev/rules.d/.

sudo cp-i 99-pololu.rules/etc/udev/rules.d/
sudo udevadm control--reload-rules

To open the GUI, go to the "Maestro-linux" folder and enter

./maestrocontrolcenter

Attention.....

Ubuntu has a serial permission problem, many ways on the Internet are very complex, the following introduction of a simple

sudo su
chmod u+s/dev/ttyacm0