Power is on, not charging

Power off, unplug the battery and plug it in again, then plug it in and power it on-- OK, it's ready to recharge. . (Even if the power is not turned off, directly reseat the battery (╯3╰), but feel this is more dangerous)

But this is a temporary solution, often in a few days after the problem again and again ~ ~ ~ for me, which seldom shuts down, it is a torment. Baidu has not found a half a day to find any way, helpless or Google:

The problem English is "plugged in, not charging" Press this Google, can find a lot of ways, more than Baidu strong

Option 1:

>disconnect AC
>shutdown
>remove Battery
>connect AC
>startup
>in Device Manager, under the Batteries category, right-click all of the Microsoft ACPI compliant Control Method batter   Y listings, and select Uninstall. Warning:do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
>shutdown
>disconnect AC
>insert Battery
>connect AC
>startup

Option 2:

Uninstalling and reinstalling Power management software in Windows Vista
In order to correct problems with the battery ' s power management software, follow the steps below.
1.Click Start and type device in the search field, then select Device Manager.
2.Expand the batteries category.
3.Under The batteries category, right-click the Microsoft ACPI compliant Control Method Battery listing, and select Uninst All.
Warning:do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
4.On the Device Manager taskbar, click Scan for hardware changes.
Alternately, select Action > Scan for hardware changes.
Windows would scan your computer for hardware that doesn ' t has drivers installed, and would install the drivers needed to M Anage your battery ' s power. The notebook should now indicate, the battery is charging.

All of these are a Power drive () with a load dump system, and the second method is simpler to operate

There are some ways to find it:

1-first Unplug the charger pin from laptop.
2-right Click on the battery icon and select the different plan for the battery for example if it's set on power saver s Elect 1 from 2 i.e balanced or high performance.
3-then plug the pin again ...
That ' s it.

1. Change in date is different year it start charging again.

Power is on, not charging