The effect chart can also be completed in PS, but the process is a little more complex, you need to make multiple layers of text, each color and size of a little change. Then give each layer to add a projection and so on to make three-dimensional effect, and then the overall increase of background and other decorations can be.
Final effect
1, we open the AI, a new document: 900 * 600 pixels, color mode for RGB, raster effect for the screen, click OK, so good.
2, we use the Text tool in the document to write down their favorite text or symbols, font suggested by strokes a bit thicker text, color: #ed0072.
3, this step is actually very complicated, to repeat several times, please be patient. Select the text, and then select: Objects > Extensions, tick "objects" and "fill", and then click OK.
4, and then select: Object > Path > Offset path, draw the first layer outline.
5, the Curve group, the color set to: #ff0051.
6, select the first layer contour, select: Object > Path > Offset path. Draw the first layer contour, the displacement is 5, the other setting is unchanged. Click to determine the group after the curve, the color set to: #fe2514.
7, repeat this step, the displacement once for 10, 15, 20, 25, 30, we will see the following effect.
8, the color from the first layer to the lowest level is as follows.
Then we open PS, also create a new 900 * 600 pixel, color mode is RGB, resolution of 72 pixel/inch document, from the AI in a copy of the road to paste in the PS, paste the item Select "Smart Object."
9. To make it easier to differentiate, we name the layers of these smart objects from the top down.
10, the "Outline 1" Above the new blank layer, named "Text layer façade", and load the text layer into the selection, in the text-level façade fill color (consistent with the color and text color), select the Selection tool, press the ALT key while pressing the arrow key down 1 times, and then cancel the selection, fill the layer style.
11, the same method of each layer to make a façade, the idea of perspective relationship, thickness to change. Because of the elevation effect, the position of each layer should be shifted correspondingly, the following figure.
12, in the background layer of new blank layer, named "Background" from the top down to pull a gradient, color: #7e8892, #484f57. Then use the filter to add noise.
13, finally add ribbons and embellishment to complete the final effect.
Note : More wonderful tutorials Please pay attention to the triple Photoshop tutorial section, triple PS group: 339853166 welcome you to join
Category:
- PS Getting Started Tutorial