PS Composite Mouse Car

Final effect Diagram

1. First, the mouse from the picture extracted, the way is to use a pen to the outer contour of the mouse hook out, and the hook path to the selection, copy the selected mouse, and then paste the mouse, and the original bottom image is the background layer deleted or filled to white. Note: When you pull the map as much as possible, you can shrink one pixel after you convert to a selection and then copy and paste.

2. Open the picture of the car, will need the same part of the above method to check out, the hook can be along the edge of the car line hook, the same path to the selection, will be selected part of the copy, back to the mouse image Ctrl + Paste.

3. Press Ctrl+t to drag the wheel to look, hit enter to determine, and the position of the wheel for further adjustment.

4. The front wheel and the mouse does not fit place with a pen to check out and into the selection, with the black tire fill.

5. After the drag in the previous step, the rear wheel looks a bit too wide! This does not conform to the actual perspective principle, so we can use a pen to check out the rear wheel width, into a selection, and remove the selected section.

6. Back to the mouse layer, the base redundant parts such as hook out, and delete.

7. The original car picture in the front of the front of the white light tick, copied to the mouse image of the file, press ctrl+t, double-click this layer in the pop-up layer blending options to select bevel relief effect, type choice pillow relief, size set to 1, the rest unchanged.

8. Check out the car headlamps in the car picture, and copy them to the mouse file, press Ctrl+t to size and position. and copy this headlight, to the menu-edit-Change-horizontal flip, and then press Ctrl+t to adjust to look.

9. Now the car looks a bit out, but the front is still relatively small, not mellow, we help it to change. Back to the mouse layer, with a pen to check out the outline, converted to a selection, with the brush selection and selection near the color of the next smear, do not paint too heavy, as far as possible natural.

10. Now it's time to adjust the color uniformity, press Curl+u to adjust the saturation of the mouse layer to 80, and then press Ctrl+b to adjust the yellow to-100, red to +60. Then press Ctrl+m to adjust the curve slightly (Fig 12), when finished.

11. The synthesis of the rat car in this way, the specific details, we can make a copy of the tire layer, placed under the mouse layer, and adjust the position, make the car on the other side of the tires, other people will be free to play, do their favorite treatment.

Category:

• PS Composite Picture Tutorial