PS Filter making blue denim texture Background tutorial

The individual is interested in the background of the interface, because its texture is very unique, the color is also very calm and mysterious, and then pondering the production method.

Perhaps this background is generated by a third party special filter, perhaps with some material processing, or perhaps in the drawing software a layer of layers superimposed

I mean there are a number of ways to do this, so the following methods are just one of them.

First look at the effect of the picture:

(1) First analysis of this background, through the acquisition of Web page material we learned that this page is a picture of a continuous tile to get,

So we create a new 256x256 (other size can also) PS document, and filled with purple black

(2) Create a new layer and use "filter-noise-add noise" to adjust the value to get the clutter density in a similar diagram,

Then "image-adjust-to color" to get the black and white dots below

(3) Then create a new layer, draw vertical lines, follow the "bright, shoot bright, empty" this law is covered with a row. Then load the black and white clutter into the channel as the layer's mask,

Get the following effect

(4) Create a new layer, use "filter--render--fiber", set the parameters as follows

The resulting pattern is then rotated 90 degrees to a horizontal direction. Then copy the layer and perform "filter-noise-dust-and-paint" on the copy, as shown in the diagram set parameters.

Finally, the layer mode of these two layers is set to overlay, and the following results are obtained

(5) Merge all the layers so far and name it "merge" (remember to do the backup). Creates a new layer. Use the method in the previous step to make the fiber effect in the horizontal direction,

Then use "image-adjust-levels" to deepen the black highlight white, the following effect

Load the white part of the image as a selection, then switch to the merge layer, and perform a Gaussian blur with a value of 2, which results in the following

Zoom in on the right side of the details can be seen in some areas have been blurred processing.

(6) Then carry on some effect processing: add noise, adjust contrast, adjust saturation degree. Get the following final results

(7) Set this picture as PS, create a new 1280x800 wallpaper size, fill with this pattern. Finally add four weeks of dark angle, done!

Category:

• PS Filter Tutorial