PS Processing warm color series outdoor photos

A lot of people like to shoot outside, especially in this spring, but outside the clap often encounter light poor situation, resulting in a flat, this How to do? In fact, you can change the idea, with PS to create an atmosphere, there may be unexpected harvest Oh! The following is a super simple way to let you hit the season, in the spring to take the autumn beautiful portrait. Final effect Diagram

1, open the original artwork in PS, create "Layer 1".

2, click the "Create a new fill or adjust Layer" button at the bottom of the panel and select "Channel Mixer", where the red in the output channel is adjusted, as shown in the parameters (figure I). Repeat the previous step, adding "Channel Mixer 2", which also adjusts the red in the output channel, as shown in (Figure II). The opacity of the two channel mixers is set to 50%, 55% respectively.

(Figure I)

3, select the "Optional Color" command, the specific parameter settings see the figure below.

4, select the "Photo Filter" command, for the photo to add a little warm tune, the parameters are set as follows:

5, select the "Optional Color" command, respectively, adjust the red, white and neutral color, the parameters are set as follows:

6, continue to choose "Optional Color" command, the red, yellow, green, green, blue, white, neutral color adjustment respectively.

7, such as the figure "Choose color 4" layer blending mode is "soft light", opacity is 40%. Select the Levels command, as shown below. This step is mainly to increase the contrast of the image, so that the picture more clear and transparent.

8, select the "curve" command, the specific adjustment as shown below. This step is mainly to increase the overall brightness of the image, so that the picture more bright.

9, "ctrl+shift+alt+e" stamped layer, get "Layer 2".

10, the implementation of "filter" | "Imagenomic" | "Portraiture" command (note: The purpose of this step is to make the skin more smooth, showing a perfect skin effect). The parameter settings are shown below.

11, press the keyboard shortcut "J" to choose the Repair tool, the characters face small spots to get rid of (note: Repair tools to remove miscellaneous points, do not check the face too large area, to 1.1 points of removal, repair must be careful and careful).

12, "ctrl+shift+n" new "Layer 3", the foreground color is set to "black".

13, the implementation of "filter" | "Digital Anarchy" | "Knoll Light Factory" command, select the effect of 85mm, parameters such as figure. This step is designed to make a spot.

14, change "Layer 3" layer blending mode to "filter", the effect as shown in the figure.

15, "ctrl+shift+alt+e" stamped layer, get "layer 4" layer. Perform "filter" | "Sharpen" | "USM sharpen" command, change Quantity to 80%, other values unchanged, the effect is as shown.

16, Merge all layers, the final effect as shown.

Note : More wonderful tutorials Please pay attention to the triple Photoshop tutorial section, triple PS group: 182958314 welcome you to join

Category:

• PS Image Processing