PS Pull out the foreign shallow neutral tune big course

The illustration above is a comparison between the Photoshop tutorial effect and the original picture

Now we're going to start with the production of light-colored neutral tones (also called light coffee).

First of all, we look at the main problems of raw materials: 1. There is no level of gray screen. 2. The complexion is suffused with red.

Key points of knowledge Applied: 1. Calculate the black and white gray three selections with the calculation of PS. 2. Use hyperbola to strengthen shadows and high light. 3. Remove the red and yellow characters and add the red and yellow artificially. Of course, there are some small points of knowledge.

The first step: Calculate the selection with the method of calculation (this knowledge point I have written this tutorial, if you will not be able to study here

As shown in the following illustration:

The next few channels are computed for the selection.

The second step: the picture of the gray and high light, so that the whole picture of the level of sense can come out. But I also put on the dark part of the light, I want a high profile film. Can according to their own needs to adjust, people are alive.

What to do: Hold down the CTRL key in the dark selection and click the thumbnail to get the dark selection, which is highlighted in the curve as shown:

Adjusted contrast chart (left image is original):

The same steps highlight the gray and highlight selections to get the following image (the original image on the right):

: We compare the above two pictures can see the adjustment of the level of a good sense of exposure more accurate, this step is not dead, there are many ways to get such effects such as the individual adjustment curve or color level, as long as you think you can place

A good method is all right, whether it is a black cat or a white cat, as long as the cat can catch the mouse is a good cat.

The third step: want to present skin texture, first need you to throw away the image of overweight yellow and red, and then in artificial for the film add color.

First remove the red and yellow saturation and then create a new blank layer and fill in the color we need {c94c09}, change the blending mode to soft light and combine opacity to adjust, each film's situation needs to be achieved

is not the same, so do not die to memorize parameters.

As shown in figure:

The image above is the effect of removing the red and yellow saturation