Quick configuration of broadband wireless cats for beginners

We have introduced the basic configuration of broadband wireless cats at the ADSL end in the previous section. Next we will recommend a fast configuration method for broadband wireless cats for new users, this method is simple and requires no excessive network knowledge.

Fast configuration of ADSL Broadband Wireless cats

By default, the DHCP service is enabled, and the fast configuration of the broadband wireless cat is also supported. In addition, the ADSL module generally supports the ADSL Broadband Access modes such as PPPoE, PPPoA, MER, IPoA, and bridging. According to the feedback from domestic household users about the ADSL access method, PPPoE and MER access solutions are more common.

Before fast configuration of broadband wireless cats, let's take a look at PPPoE, which is the Point to Point Protocol over Ethernet Point-to-Point communication Protocol based on LAN ), this Protocol is the latest standard developed to meet the needs of more and more broadband Internet access devices such as ADSL and wireless networks) and communications between faster and faster networks. It is based on two widely accepted standards: lan Ethernet and PPP point-to-point dialing protocols are the most common method for ADSL access. After you select the PPPoE connection mode, it is easy to set up. You only need to enter the user name and password provided by the ISP and related parameters, such as on-demand dial-up and automatic disconnection time. Fast configuration of broadband wireless cat is also a very suitable setting method for new friends.

In addition, if ISP limits the routing of broadband wireless cats, you can enable the WAN port service or IGMP multicast IP multicast in this setting, which is applicable to point-to-point transmission and broadcast transmission, it refers to the broadcast of its members in a certain group. It is a limited broadcast. The information sent by a member in the group can be received by all other members in the group. You can also create a new network connection for both two or three computers.

In addition, to effectively restrict Internet sharing, an ADSL access method called MERMAC Encapsulation Routing is increasingly favored by ISPs. If you use this method to access the Internet, you generally need to enter the specified IP address in the IP address bar, the subnet mask value in the subnet mask column, and a fixed gateway IP address.

Enter the preferred DNS server address and backup DNS server address specified by the ISP in the WAN port connection channel. Enable the WAN service to make the corresponding WAN port PVC connection take effect. Of course, if the local ISP does not have too many restrictions, do not forget to enable NAT to allow multiple hosts in the LAN to share one Wan IP address) and IGMP multicast. Now the fast configuration of the broadband wireless cat has been completed. Is it very simple and fast?