"Xun Mao" @ How to distinguish between the top screen and the bottom-mounted screen de-foaming device

"How to distinguish the top screen of the foam remover and the bottom-mounted screen de-foaming device Method" Detailed introduction
In the diameter of the front plus s for the top-mounted screen in addition to the foam, in the diameter of the front plus x for the bottom-mounted screen de-foaming device, such as: S2000-150SP is the top-level screen to remove the foam, diameter of 2000mm, screen height of 150mm, screen type SP type. The difference between the top and the bottom, in addition to the foam itself, there is no difference, the difference is that the top and bottom of the device to remove the need for the support of the different. The top or bottom depends on the position of the manhole of the tower: when the manhole is located above the foam, or if only the flange has no manhole, select the upper; Similarly, when the manhole is located under the foam remover, select the bottom-mounted type de-foaming device.

Applications and Materials:

Screen remover is widely used in chemical, petrochemical, pharmaceutical, environmental protection and other industries, for the removal of entrained in the industrial gas of the tiny fog, for the diameter of 3-5 micron droplet, the overall mist removal efficiency of more than 98%. Usually used in the material of the screen de-foaming device stainless steel (304, 304L, 316, 316L, etc.), pp (polypropylene), PTFE (PTFE), nickel wire, titanium wire, copper wire and so on.

Performance Description:

The net layer thickness of the mesh is divided into 100mm and 150mm2 kinds of specifications.
Screen de-Foaming device application Objective: in distillation, absorption, analysis, increase (decrease) wet gas (vapor) liquid mass transfer, heat transfer unit operation, whether the use of packing tower or plate tower, are through the two-phase close contact and sharing to promote the transmission of the same components, to achieve liquid or gas purification, increase (minus) wet and so on. When these processes leave the gas phase of the filler layer or tray, a certain number of droplets or droplets of different sizes will be entrained: in the subsequent cooling and refrigeration process, a tiny particle suspended in the gas phase is formed, and the gaseous phase reaction between the components may also produce smaller particles when the material being processed is more complex.
Deodorant Material:
①. Wire mesh and foam remover frame and all stainless steel plate supporting member;
②. Wire mesh for stainless steel, in addition to the foam frame and supporting components for carbon steel;
③. Other wire or non-wire for wire mesh, frame and support member is stainless steel or carbon steel.

Tel: 15512999172 (manager Liu)

Email: [Email protected]

: 15512999172 qq:3538602699

HC Website: https://apxxmjs.b2b.hc360.com/
Steel Mesh Website: http://www.gangbanwangxm.com
An Pingxun Mao screen de-foaming Plant---15512999172

"Xun Mao" @ How to distinguish between the top screen and the bottom-mounted screen de-foaming device