The start is quite smooth, the first use of the people on the Internet streamlined OS, found that the act and the PWR lamp has been on, internet access to say with HDMI to connect the display needs to modify the configuration file Config.txt, but the situation is still unchanged.
If you still use the official system to try it, the internet search for the last 2015 years (feel should not be the latest, first try, no more brush also minutes of things, who call us so love toss it): Http://pan.baidu.com/s/1dD79LiL, brush SD Card tool:/HTTP pan.baidu.com/s/1dddha3b
OK, here is my modification before and after the configuration file comparison, specific parameters can be online check, many instructions on the Internet, no longer here to repeat:
Save after modifying, and then perform the following steps:
- Put the SD card into the Raspberry Pi card slot
- Connect the HDMI cable to the Raspberry Pi and the monitor HDMI port, switch the Monitor to HDMI mode (I use the LG Monitor, the desktop computer uses the DVI interface and the monitor connection, the monitor switch is very convenient, touch the Input/exit place to realize the switch easily)
- Use one end of your phone's USB cable to plug it into your computer's USB, one end plugged into the Raspberry Pi power port.
On the monitor, we see the start command line of the Raspberry Pi:
The first launch will have a setup interface, I look at the interface login mode:
found that the running interface is still a little slow, but the usual use or command line method is more convenient, in the Windows with SSH login, a lot of methods, internet a search a bunch, no longer repeat.
Next, have fun ...
Raspberry Pi B + Get started-connect the monitor using the HDMI cable