Reload Win7 system boot has been stuck in the Self-Test interface how to solve

The steps are as follows:

1, connect the power, the computer first automatically run the motherboard BIOS chip curing program, commonly known as post--on the self-test (Power On Self test).

2, when the self-test is completed, the system to the next step: from the hard disk, CD-ROM or network server to find the operating system to start, the control of the computer will be completed by the operating system.

3. In safe mode, on the disk partition that prompts for error (such as D disk) Right click and select "Properties"-"Tools" (tab)-"Check error" (option)-"Start check", check the "Automatically fix file system errors" and "scan and attempt to recover bad sectors" and left mouse click on the "Start" button. The whole process is completed in five stages, after the error is completed, restart the computer, solve the problem.

Another method: Execute the chkdsk x: F command in Start-run to fix an error partition, X: Represents an error in the letter. However, if an error is encountered, Chkdsk pauses and displays the message. When Chkdsk finishes a task, it displays a report with the disk status listed. You cannot open any files on the specified drive unless CHKDSK has completed the task.

4, usually is the computer hard drive has the bad road to cause.

The way to speed up the time of switching machine:

1, the less the boot process, the faster the system starts, start-run, type "msconfig". Click "Start", suggest you only stay: RFW Main,rav Tmer,rav Mon These three are rising anti-virus software, should be activated at any time to monitor the system, Ctfmon.exe is the input method display, these three items do not delete;

2, another start-All programs, find "start". Click on the open, delete all of the inside. Some systems must be used, and you are setting him up to not let it start, it also shines.

3, with "sleep" to speed up the boot speed. If this feature is not turned on, you can: Start-control Panel-performance and maintenance-Power options, click the Hibernate tab to make sure that the Enable Hibernate check box is selected, click OK, and then, when you shut down later, select Hibernate to convert it to hibernate if you are holding down shift in standby in the Shutdown dialog box. When this is turned on, the automatic quick restore to the state of this shutdown.

4, if your system teaches stability rarely failure of system failure, you can do the following: Start-control Panel-performance and maintenance-system, open the system Features-Advanced tab, use the "Startup and Recovery" button in the interim, open the Startup and Recovery dialog box, and "System failure" Write the events to the system log and send administrative alerts, and then open the drop down list of write debug information and then "OK" after "none". Can download "Optimize master" software, use its optimization function, also can. For reference only.

5, reduce the boot to make the scroll bar scrolling times. Start-run, OK. Type "regedit" to open to find "hkey-local-machine-system/current contralset/control/sessin manager/memory Management/preech Paramentrs Branch, in the right window to find "Enableprefecher" Zijian, its value set to: "1", right click My Computer-Properties-hardware-Device Manager-Expand the IDE Ata/atapz controller, double-click the secondary channel IDE. In the dialog box, select "Advanced", and then "Device 0", the original set of "Automatic detection" to "none", the main channel is also so modified. Restart the computer, the scroll bar reduced to 3 times (original more than 10 times).

6, start-run, OK. Type "regedit", open hkey-current-user/controlpanel;desktop/, find "hungapptineout", change it to "5000", and the other "waittokillapptimeout , change its value to "4000". And then Hkey-local-machine-system/currnentcontralset/control, put the waittokillservicetimeout "of the key value also change to 4000".