Rospberry Pi B +

1 Image Recognition

Rospberry Pi B + was finally delivered by snail mail this afternoon. B + is mainly to add 2 USB, added gpio, SD card changed to micro SD... Let's not talk about it directly. I have been looking forward to it for a long time.

Full Version

Samsung package (B + DDR2 + GPU) + lan9514 (Network PHY + Mac + 4 * USB controller)Broadcom bcm2835 700 MHz arm1176jzfs with FPU processor and 4-core GPU Processor

HDMI output + display + camera interface

Mesh (10/100 m) + 4 * USB +3.5Audio Output

40 * gpio

Power Management (5 V ---> 3.3 and 1.8 V) + microUSB Power Supply Max 2a current

2. System Installation

1: First prepare an 8 gb sd card (micro), format, and then download Noobs system production tools: http://www.raspberrypi.org/downloads/

2: decompress and copy the package to a clean SD card.

3: connect the Raspberry Pi cable to the HDMI Power Cable keyboard and mouse ----- start the power on

On the system selection page, select raspbian.

After installation is complete, press shift to automatically restart to enter the raspi-config interface.

On the configuration page, enable SSH overclocking and so on. Finish and restart.

Install a test frequency: sudo apt-Get install cpufrequtils

Cpufreq-Info-H

In general, B + is quite good.

To be continued ...................................... .. the highlights will be presented later ................................ stay tuned to this blog http://blog.csdn.net/xiabodan

Refer:

Http://www.raspberrypi.org/downloads/

Http://shumeipai.nxez.com/2014/07/14/introducing-raspberry-pi-model-b-plus.html

When there are already too many other users

Rospberry Pi B +