Routing configuration of ADSL modem

We used to surf the Internet through my computer as proxy SERVER, other computers through this stage of the Internet, very annoying, I often one months do not turn off the machine ah, but also installed something to restart a bit of trouble, since the success of the modem configuration into a router after the cool Dora!

The steps are as follows: (Take my ea700a modem for example)

First of all, to know the region's virtual path identification number (VPI), virtual channel identification number (VCI) value, this can be called from the telecommunications data room in the people that cheat, Hangzhou is 8/35, hehe

Then the ADSL modem and hub even better, all computers are connected to the hub, you can start.

Go to the command prompt:

Telnet

OPEN 192.168.1.1

Enter Password: 1234

Enter a menu, enter 1 to enter the general settings, configure

System name= ea700a

Location=zist

Contact person ' s name= Liaoye

Route ip= Yes

Route ipx= No

Bridge= No

Press ENTER to return to main menu when you have finished modifying

Select 3 in the main menu to set the network too.

Menu 3-ethernet Setup

1. General Setup

2. TCP/IP and DHCP Setup

3. Novell IPX Setup

4. Bridge Setup