Routing settings and techniques of comelease KM300A-G

1. The default IP address of this ADSL instance is 192.168.1.1. Therefore, before setting the IP address, set your host to 192.168.1.x (x can be any value ranging from 2 to 255) and set mask to 255.255.255.0. Enter 192.168.1.1 in IE to enter the configuration interface. The default user name and password are all root.

If you have changed the default IP address of ADSL, please log in with your own method.

2. If you have modified this cat, go to "Management \ submit & restart", select "restart mode" as "reboot from default configuration", and click restart. After a while, press 1 to log on again.

In this step, only the default settings are restored. To reduce unnecessary troubles.

3. On the device information page of the home page, set the page according to the following text description. This figure is used as a reference.

4. Pay attention to the 3 circled in red. The default value is 8/35, and China Telecom uses exactly 8/35. Therefore, we need to modify this value. If China Telecom on your side is not the value, modify the item that exactly corresponds to this value. If there is no value provided by China Telecom, do not modify it.

Modification method:

5. Click quick settings on the homepage.

For example, set the red part according to the value provided by China Telecom.

Select 5 for the ATM interface, because the system already occupies four accounts and cannot be used.

Select enable in Operation Mode

Choose disible for brige.

6. After you click confirm in the previous step, items 1 and 2 in the first figure will appear in the device information on the home page. After a while, the status light of the first item will change to green, it indicates that the number has been automatically pulled, and the IP address is automatically obtained.

Sometimes Step 1 may fail. You can disconnect the ADSL power first and try again. However, make sure that the ATM interface is not in use, and the VPI/VCI combination does not appear in other interfaces.

7. In this step, set the LAN to DHCP mode, which saves a lot of trouble.

Select "DHCP Server" as the DHCP mode in the local network/DHCP mode, and press OK.

8. The current homepage/device information is shown in every figure.

Now, at the top of the "route/IP Route" field, there is an item with the goal and the network mask being 0. And there are several items with your dynamic IP address. This is the success!

Finally, click submit in "manage/submit & restart", submit your modifications, and then click restart to write your modifications to the cat's memory. After a while, the cat will automatically dial the number online and start routing.

9. Finally, set the client:

Dynamic IP: the IP address of the client is automatically obtained, and the DNS is automatically obtained.

Static IP: the IP address of the client is set to the IP address on the same network segment as the MODEM, And the gateway and DNS are set to the modem address. Everything is OK!

I have been busy for a long time. I should have done it. I don't know if there are any omissions? I hope you can add it!

(T113)