Sea Spider tomato Firmware Brush Machine Tutorial

When we use routers, the default router firmware is often designed to be too simplistic to meet our requirements, and we solve this problem by using a more powerful Third-party firmware. Sea Spider Tomato Series route, is according to the embedded Linux system development of Third-party firmware, can be widely brush into the market on the common Broadcom chip routers, the current support brush machine routing mainly has Lei Ke, Asus, Cisco and other brands, brush machine after a more powerful than the original routing manufacturer function.

The market to upgrade the router to the Sea Spider version Tomato firmware, brush machine method can be divided into the original web upgrade and TFTP upgrade two brush machine methods.

Its specific brush machine method is as follows:

Method One: Log on to the Web administration address of the original route and upgrade through the firmware upgrade feature of the original route

1. First of all, to ensure that the upgraded computer (PC) IP address and routing of the same network segment, such as: the management address of the gateway: 192.168.1.1 (note: Routing management address can be found in the manual or route behind); The network IP address of the computer is configured to: 192.168.1.X, as shown in the following illustration:

As shown in the figure above, the IP address of the computer is configured to: 192.168.1.15. When the configuration is complete, click on the "OK" button. When the computer network IP address configuration completed, in the computer "Start → run" in the input "cmd."

As shown in the figure above, when the click is OK, enter "Ping 192.168.1.1" in the system terminal and return, test the computer and routing management address can connect. As shown in the following illustration:

The network between the computer and the gateway can be connected, as shown in the above picture. In the browser's address bar, entering "192.168.1.1" will pop up a login box with the username and password of the gateway.

When you enter the corresponding username and password in the landing box, you can log on to the function page of the route. As shown in the following illustration:

In the system tool → software upgrade select Tomato-k26-1.28.--defmipsr2-mini.trx file (Sea spider version Tomato upgrade file), click "Upgrade." When you click on the upgrade, the page pops up with a prompt box, as shown in the following image:

When you click on the "OK" button in the Prompt box, the route goes through the upgrade process (do not power off or turn off when the gateway is upgraded). When the upgrade is complete, the gateway automatically restarts, and when the reboot is complete, the reset key through the gateway restores the factory value to the routing. When the gateway restores the factory value, enter "Ping 192.168.1.1" through the computer terminal to test whether the computer and gateway can connect, as shown in the following figure

When the computer and routing can connect, through the browser address bar input "192.168.1.1" (Sea spider tomato version of the default address is: 192.168.1.1), the system will pop-up login username and password input box; Enter the corresponding login username and password in the input box (sea spider Tomato version default login username and password is: Admin/admin, as shown in the following figure:

When you enter the correct username and password, you can log on to the function page of the gateway, as shown in the following figure:

When you can log on the Sea Spider landing page, you have to congratulate you, by way of a pair of routing brush machine success.

Method Two: Through the TFTP software to brush machine

When routing does not support Web direct upgrades to Third-party firmware, the TFTP tool is used to upgrade, and the TFTP upgrade steps are as follows:

1, the first step is to ensure that the upgraded computer (PC) IP address and the management address of the route are the same, for example: the management address of the route is: 192.168.1.1 (note: The Routing management address can be found in the manual or route); the computer's network IP address is configured to: 192.168.1.X as follows:

As shown in the figure above, the IP address of the computer is configured to: 192.168.1.15. When the configuration is complete, click on the "OK" button. When the computer network IP address configuration completed, in the computer "Start → run" in the input "cmd", as shown in the following figure:

As shown in the figure above, when the click is OK, enter "Ping 192.168.1.1" in the system terminal and return, test the computer and routing management address can connect. As shown in the following illustration:

2, in the computer double click "TFTP smart Brush Machine 1.62.exe", as shown in the following figure:

When the TFTP tool is running, enter the administrative IP address for the route in router IP, as shown in the following illustration:

As shown in the figure above, click the "Browse" button on the right side of the firmware upgrade, select the firmware upgrade file to upgrade, and recommend that the "Smart Brush Machine" be selected

3. Reconnect the routed power supply or reboot, and click the "Update Firmware" button in the TFTP tool, as shown in the following figure:

4, when the route restart, will automatically receive the upgrade file from the TFTP tool, and automatic brush machine, as shown in the following figure:

5, when the brush machine is completed, the TFTP tool will prompt success information, as shown in the following figure:

6. When the TFTP ToolTip is successful, turn off the TFTP tool. When the gateway brush is completed, it will automatically restart, in the process, through the computer terminal input "ping 192.168.1.1-t" to observe the device startup process.

7, when the route restart completed, through the reset key to the route to restore the factory value. When the gateway restores the factory value, enter "Ping 192.168.1.1" through the computer terminal to test whether the computer and route are connected, as shown in the following figure

When the computer and routing can connect, through the browser address bar input "192.168.1.1" (Sea spider tomato version of the default address is: 192.168.1.1), the system will pop-up login username and password input box; Enter the corresponding login username and password in the input box (sea spider Tomato version default login username and password is: Admin/admin, as shown in the following figure:

When you enter the correct login username and password, you can login to the function page of the gateway, as shown in the following image:

When you can log on to the Sea Spider landing page, you have to congratulate you, by way of two ways by the brush machine success.

        Note : more Wonderful tutorials please focus on the Triple computer Tutorials section, triple Computer office group: 189034526 Welcome to join