Security Configuration of TP-Link Wireless routing (illustration)

Next I will explain the TP-Link Wireless route security configuration diagram). According to the figure below, I hope the majority of users will give me some suggestions, preferably those who have experienced the suggestions. Thank you. The security settings of wireless networks are commonly used. One is to pass the security authentication of keys, and the other is to filter the MAC addresses of wireless NICs, key Authentication is suitable for wireless networks with a large number of computers. You only need to set a key at the Wireless Broadband Router end once, in the future, enter the key on each computer that joins the wireless network.

MAC address: the MAC address is the unique encoding of each network card in the world) the filter function prevents computers with certain MAC addresses from accessing the local wireless network or only computers with these MAC addresses from accessing the local wireless network. In this case, only one computer needs to be added. Therefore, it is more suitable to use MAC address filtering, and external wireless devices with high security will not be able to access our wireless network, therefore, you only need to add a MAC address to the Wireless Broadband Router. Then, follow the steps shown below:

 

TP-Link Wireless route Security Configuration

 

TP-Link Wireless route Security Configuration

 

Enable Filtering for TP-Link Wireless route Security Configuration

 

TP-Link Wireless route Security Configuration

 

TP-Link Wireless route Security Configuration

For the security configuration of the TP-Link Wireless route, we need to configure the DHCP function of the following Wireless Broadband Router, so that we can use it more easily in the future: in this way, we have completed the most simple installation and configuration of the Wireless Broadband Router.