Security Accident Management System

1. Purpose
Strengthen the reporting and handling of accidents, and strictly implement "four failures" (that is, the cause of the accident is not identified and the person in charge of the accident is not handled; leaders and the masses of the units responsible for accidents have not been given education; no feasible preventive measures have been formulated .), Sum up lessons learned and take effective measures to reduce and prevent accidents.
2. Scope of adaptation
Applicable to the unit of a joint stock company.
3. Responsibilities
3.1 The Security Office is the management department of a security accident. according to the instructions of the Security Committee, it organizes an accident investigation and puts forward handling opinions in accordance with this provision.
3.2 All relevant units responsible for accidents are responsible for taking immediate measures to prevent the accident from continuing to develop, protecting the accident site, reporting to the competent department immediately and truthfully, and submitting the accident report within the specified time.
3.3 The Production Equipment Department is responsible for production accidents and equipment accidents; the Safety Office is responsible for casualties and explosion accidents; the technical center is responsible for product quality accidents and infrastructure engineering quality accidents; fire Accidents and public security incidents shall be borne by the Security Department; and traffic accidents shall be handled by the general manager's office.
4. Classification of security incidents
4.1 production accident: in the production process, the loss of raw materials and semi-finished products is a production accident.
4.2 equipment accidents: equipment accidents are caused by failure and damage to production devices, power machinery, electrical instruments, safety devices, transportation equipment and buildings, resulting in losses or reduced production.
4.3 casualties: minor injuries, serious injuries, and deaths due to risks in the production process.
4.3.1 minor injury: loss of energy damage less than 105 days on a business day.
4.3.2 Serious Injury: A person with a loss of one or more days after the business day is equal to or greater than 105, or in any of the following circumstances: the person diagnosed as disabled by a physician or possibly impaired, the injury is serious, A large operation is required to save the problem. Serious burns, burns, or non-critical parts of the body, but Burns occupy more than 2/3 of the whole body area; severe fractures (sternum, rib, spine, clavicle, shoulder blade, wrist, leg, and ankle fractures due to injury); severe concussion; eye injury is more serious and may cause blindness; hand injury: the thumb refers to a broken section. The forefoot, middle finger, ring finger, or small finger can be broken by two or two of the two fingers, it can cause muscle dysfunction and disability that cannot be bent freely. foot injury: more than 3 broken toes, and local muscle Jian injury, it may cause muscle dysfunction and disability that cannot be freely walked; internal injury: visceral injury, internal bleeding or injury, and peritoneal injury.
4.3.3 casualty: one accident with 1-2 deaths;
Major casualty incidents: an accident with 3-9 deaths;
Serious casualty: an accident with more than 10 deaths (including 10 deaths.
4.4 Fire Accident: for some reason, fire occurs in the production area and the loss of production property is a fire accident.
4.5 security incidents: for some reason, property theft or damage caused by the company is a security accident.
4.6 Explosion Accident: A chemical or physical explosion occurs for some reason, causing loss of life and property.
4.7 traffic accidents: A traffic accident may cause damage to vehicles, casualties, or property losses.
4.8 quality accidents: products and semi-finished products do not comply with the quality standards stipulated by the state or the enterprise. The quality of infrastructure engineering does not comply with the design requirements, the maintenance of mechanical and electrical equipment does not meet the requirements, and the raw materials or products are kept, poor packaging and deterioration are all quality accidents.
5. Division of accident nature
5.1 Major Accidents
5.1.1 one death, one serious injury, or more than one minor injury.
5.1.2 accidents that cause direct losses of more than 5000 RMB.
5.1.3 all power outages in the power supply area of a Power Distribution room.
5.1.4 an accident that causes financial losses of more than 2000 RMB due to fire or theft.
5.2 General accidents
5.2.1 minor injury: one person, one working day off from work injury.
5.2.2 accidents that cause losses of less than 4000 RMB due to production devices.
5.2.3 an accident that causes a local power failure and affects a production unit.
5.2.4 accidents that cause losses of less than 2000 RMB due to fire or theft.
5.3 liability accidents: accidents caused by violation of labor discipline, operating procedures or improper operations; approval of fire operation violations in fire prohibited areas Program Accidents that occur due to unauthorized fire or failure to take preventive measures due to the execution of approval procedures; accidents that result from the implementation of corrective measures are not serious or timely, so that hidden dangers cannot be cleared in a timely manner.
5.4 natural accidents: accidents caused by factors in the production environment or equipment itself.
6. Safety Accident Reporting Procedure
6.1 In the event of a security accident, efforts should be made to report the accident while measures should be taken to carry out rescue work. The cause of the accident or the first discoverer should immediately report to the leadership of the relevant organization, the accident Authority reports the report step by step as required.
6.2 If an employee injury (death) accident occurs, the organization shall fill in the report form on the employee injury (death) Accident and the Work Injury Identification application form in accordance with the provisions. analyze the time, location, detailed process, injury severity, and cause of the accident, post-incident handling and measures to prevent repeated incidents form written materials to the security office and provide the evidentiary materials of the two persons on site; copies of the identity cards of the injured persons; age, occupation, time of participation, contact number, home address, copy of labor contract, attendance table of current month, diagnosis conclusion, hospitalization medical records, etc. The Security Office sorts out the materials and reports them to the anqiu Municipal Labor and Social Security Bureau for work injury identification.
6.3 report time
6.3.1 In the event of an accident, the responsible organization shall report the materials reported to the competent authority and security office by phone within one hour, and report the materials reported to the security office within 24 hours. The number of major accidents shall not exceed 2 days.
7. Work injury treatment
7.1 If an employee is injured by a work (public), the employee must be authenticated by the Company Security Committee and fill in the "Work Injury Identification application". After the higher-level Labor Department issues the work injury identification conclusion, you will be entitled to work injury leave from the date of injury. During work-related injury leave, the county hospital must prove that the company leaders in charge of the Security Committee should sign for approval within 30 days of work-related injury leave, and report the work-related injury to the general manager for approval within 30 days. In special cases, individuals must apply for extension of the leave. The applicant must sign the certificate from a county hospital or above and submit the certificate to the supervisor for approval.
7.1.1 In principle, employees who experience a work-related injury shall take 10 days to 1 month from the date of injury and 1 to 3 months from the date of serious injury.
7.1.2 skill salary during work-related holidays. No bonus.
8. Penalties for security incidents
8.1.
8.1.1 In a minor injury accident, one person points two points to the unit, and each person-time deducts 200 yuan to the unit owner.
8.1.2 In the event of a serious injury, one person points a score of 3 to the unit, and each person-time deducts 500 yuan to the unit owner.
8.1.3 major accidents shall be handled in accordance with relevant regulations of superiors.
8.1.4 if no accident report is provided within the specified date, the responsible unit is deducted 2 points each time, and the unit owner is deducted 100 yuan; otherwise, the responsible unit is deducted 2 points, 100 yuan shall be deducted from the person in charge of the unit. All losses and expenses incurred shall be borne by the responsible unit.
9. Handling of other accidents
Production Accidents, equipment accidents, fire accidents, public security accidents, traffic accidents, and quality accidents are handled by all functional departments and reported to the Security Office for archival purposes.
10. This standard shall be executed from the date of publication.