See if you can start wifi Nic:
S1: Run cmd command, open a command Prompt window ( Run as Administrator ) .
S2 : At the command line, enter: netsh wlan show drivers .
if "yes" after "supported hosting network", you can enable the virtual WiFi The network card; "No" is not possible.
Enable virtual WiFi network card:
S1:on the command line, enter:Netsh wlan set hostednetwork mode=allow ssid=User namekey=Password( mode: Whether to enable virtual WiFi network card, Allow to enable , Disallow is disabled, password is at least 8 characters )
S2: Open the network and Sharing Center? Change the adapter settings to see if there is a "Microsoft Virtual WiFi Miniport Adapter"; if not, update your wireless card driver.
S3: at this point, you can rename the new one to "virtual WiFi " to facilitate management.
S4 : Select the network connection you are currently connected to, then right-click on "Properties", select "Share", select the first item in the diagram, and in "Home network Connection", locate the "virtual WiFi " , then click OK.
S5 : On the command line, enter: netsh wlan start hostednetwork .
This is the result of the work, you can now use the wireless network.
disable virtual wifi Nic:
at the command line, enter: Netsh wlan set hostednetwork mode=disallow .
It returns to its original state: