Setting the computer boot order in the EFI BIOS

In the EFI BIOS, you want to set the computer boot order, first into the BIOS, and then use the mouse to click the Boot setting option, after entering the Setup interface, the interface is mainly to the computer's hard disk, optical drive, mobile storage device to start the order to adjust.

The various setup options in the interface are described below:

1.Quiet Boot: The system does not display the post screen when enabled, directly launches the GUI, if set to Disabled, start the post first.

2.Stup Prompt Timeout: This allows you to set the wait time to enter the BIOS.

3.Boot option Priorities: You can choose the starting way and the method.

4.Option ROM Message: This entry allows optional ROM information to be turned on/off.

5.Bootup NumLock State: This option sets the status of the number key when the system starts. When set to ON, the number key is turned on when the system starts. Allows the user to use the digital disk direction key when off is set.

6.Interrupt Capture: When set to Enabled, this feature allows optional ROM to open midrange 19.