Simple mercury route Wireless Bridge settings

In general, we only need a wireless router when setting up a wireless network, but for some network environments that cover a wide area, of course, the coverage of a wireless router is not enough. For this reason, people have invented a wireless bridge to solve this problem. A Wireless Bridge uses two wireless routers to relay signals through a wireless network, to expand the signal coverage. Www.2cto.com 1. For common users, you only need to buy a wireless router and perform simple settings to meet the needs of domestic users or small-scale Internet access. However, if the range is far away, A vro is a bit powerless. A wireless router is used in a two-tier small building. The router is placed on the first floor, and the signal in some upstairs rooms is not strong. If a user needs to share broadband access with the peer neighbors, however, wiring is difficult due to medium obstacles. Some companies' offices and warehouses are located in two buildings. When wireless routers are placed in the Office, the signals in the warehouses are weak. 2. WD is a wireless distributed system. It is built under the combination of the industrial and commercial units (HSF) and DSSS to allow communication between wireless routes and wireless routes, the difference is that the function of WDS can be used as a relay of a wireless network, and multiple wireless routes can be connected to one. Currently, many wireless routes have WDS, which refers to the data of wired networks, transmit data through a wireless network as a relay architecture, so that network data can be transmitted to another wireless network environment or another wired network. Because a virtual route is formed through a wireless network, it is called a wireless network connection function. 3. the wireless network connection function usually refers to one-to-one connection. However, the WDS architecture can be one-to-many connections, and the bridging objects can be wireless network cards or wired systems. Therefore, WDS requires at least two APs with the same function. The maximum number of APS depends on the architecture designed by the vendor. 4. wireless devices of many manufacturers support WDS, but the performance of mercury routing is always good. In the wireless product line, all wireless APS support WDS. Some wireless routers have gradually extended this function. Two wireless routers support WDS. The first one is responsible for connecting to the Internet and providing wired and wireless access for several desktops and laptops; meanwhile, point-to-point wireless bridging is performed between A and B. Route B provides both wired and wireless access for multiple computers, so that all computers share broadband access in the same LAN. 5. Another architecture is A point-to-point wireless bridge between multiple wireless devices. It uses A as the center and bridges with four wireless devices, B, C, D, and E, this architecture is widely used in office buildings, campuses, hotels, and other commercial applications. We recommend that you use mercury to route enterprise-level wireless APs. Finally, for a bridging wireless device, you need to select the same wireless channel. The default wireless channel is auto. You must change the value to 1, 6, and 11 to enable the bridging function, for a bridging wireless device, you need to select the same wireless encryption method and the same key. If you want to enable the wireless client to roam between devices, please put all the wireless devices that are bridging, set to the same SSID.