Single network card implements Virtual Switch trunk function

The hardware: NAV10-WF (full gigabit port with VLAN function), hp8740w (i7 four-core/240g ssd/32g), HP Gen8 (black cluster NAS) build VMware Horizon View and Vcloud, with the following topology: 650) this.width=650, "title=" Home topo.png "alt=" Wkiom1z47gztsyufaadiawqa3xs207.png "src=" http://s2.51cto.com/wyfs02/ M02/78/40/wkiom1z47gztsyufaadiawqa3xs207.png "/>

Because the notebook single network card must connect 172.16.20.60 (VLAN20) external shared storage, but also connect 192.168.10.0 (vlan0, without VLAN tag) and Nic usually can only receive and send the frame without VLAN tag, can not meet the above requirements at the same time. WORKAROUND: 1, plus USB Gigabit network adapter to connect external storage 2, turn on the network card (Intel 82577) trunk function. Consider the NAV10 support VLAN feature, so try the second method. For intel82577 you need to install Intel dedicated NIC management software.

Http://drivers.mydrivers.com/drivers/491_196475.htm

650) this.width=650; "title=" Intel net Card.png "src=" http://s4.51cto.com/wyfs02/M00/78/3F/ Wkiol1z475vcxujpaafjm6sveca970.png "alt=" Wkiol1z475vcxujpaafjm6sveca970.png "/>

After the installation, click on the network card--------the configuration will be a few more items, one of the VLANs, select New, enter the VLAN ID to be created.

650) this.width=650; "title=" Vlan.png "src=" http://s1.51cto.com/wyfs02/M01/78/40/ Wkiol1z48snwgkb7aad2vbfdrg4594.png "alt=" Wkiol1z48snwgkb7aad2vbfdrg4594.png "/>

(Note: Unmarked VLANs must be retained, otherwise the notebook cannot communicate with the management port of the router and the NAS) to build more VLANs, repeat

The above can be done. When you're done, you'll see multiple virtual NICs

650) this.width=650; "title=" Result.png "src=" http://s2.51cto.com/wyfs02/M00/78/40/ Wkiol1z48i-izzk2aacpkxygocm223.png "alt=" Wkiol1z48i-izzk2aacpkxygocm223.png "/>

The different VLANs are then bound to the matching virtual NIC in VMware Workstation. (For Vcenter managed ESXi host NICs no longer have to hit the VLAN tag, the corresponding port on the NAV10-WF is set to trunk port.) If the storage port for the NAS does not hit the vlan20 tag, the corresponding switch port should be access, PVID=20, if the NAS storage port is VLAN tagged, the connected switch port is set to trunk port, and pvid=1)

Single network card implements Virtual Switch trunk function