Computer boot on the blue screen code 0x000000d1, do not know what causes, this article will help you analyze the blue screen code 0x000000d1 reasons.
Then the general computer blue screen has two kinds of reasons, one is the system reason, the other is the hardware reason, then the hardware causes the blue screen The reason occupies 80% the probability, the general computer hardware does not have the question to be likely to cause the blue screen The appearance, we first saw several big important causes blue screen reason
1, memory quality is not high or bad contact or aging.
2, the hardware driver does not match or damage.
3, the system was damaged by virus some hardware configuration files were changed.
4, there are several software conflicts.
If this problem occurs in use and no software or drivers are installed, check the memory. It is usually caused by faulty drivers, defective memory, corrupted virtual memory files, some software such as multimedia software, anti-virus software, backup software, DVD player software and so on can also cause this error.
Solution:
1, set the BIOS to the default value.
2, check all connections, to the host dust.
3, check the heat dissipation.
4, test the memory is a problem, clean the slot, and then insert tight.
5, reset the virtual memory, set the virtual memory in a larger space than the C-disk partition.
6, if the Internet encountered this blue screen, and you are doing a lot of data download and upload (such as: Online games, bt download), then it should be the problem of network card driver, replace the network card driver or change the network card.
7, check the latest installation or upgrade of the driver, if the blue screen appears "" "Acpi.sys" and similar filename, you can be very sure when the driver problem, the driver uninstall, reinstall the appropriate driver.
8, replace the video card, sound card driver
9, uninstall, replace the computer software suspected of the problem, especially the killing software. Replace the game software version.
10, it is also possible that the hardware or its drivers are incompatible with the power management of Windows.
(1) Turn off the APM feature if you have APM (Advanced Power Management) settings in Control Panel/Power Options. Also disables the Hibernate feature in Hibernate.
(2) Set the Power Management option "ACPI Suspend Type" in the BIOS to S1 (some machines appear as STR) or turn off the ACPI option directly.
11, reload the system.
Analysis and Method two
2 If you do not enter the system, you can boot to the system selection where the last time the correct configuration and security mode F8, you may be able to enter the system.
3 O'Clock Start menu Run enter cmd return and enter at the command prompt
For%1 in (%windir%system32*.dll) do regsvr32.exe/s%1 and then enter. Then let him run out, should be possible to solve.
4 Recent computer poisoning, installation of unstable software, and so on, the proposed total anti-virus, unloading the software that caused the problem, reinstall the other version, it may be resolved. No more, reload the system OK.
5 computer chassis inside the memory into the dust, take apart the chassis, remove the memory, clean the memory of the fingers, reload back, it may be.
6 computer with a long memory bad, buy parallel memory, multiple memory incompatible with, and so on, it is recommended that the replacement of memory may be resolved.
7 computer used for a long time, hard drive bad, repartition installation system can repair the logic bad, or not, it is time to change the hard drive, change a hard drive can be resolved.