Solutions without lines being successfully connected by WDS but not online

For multiple wireless Routers WDS connection is successful but the network can not open the problem (both the Web page and QQ), often not the router's compatibility problems caused by the following Tplink 740N and 340G models, introduce a solution to everyone:

Route 1 Setting Method: 1, WAN port to connect extranet intelnet

2, LAN port IP address can be modified (can not be changed) by default for 192.168.1.1

3, the SSID name self-determined

4, channel settings and encryption (1-12 can)

Route Setup method 2:1, LAN port IP address reference route 1 IP settings (not the same) 192.168.1.2

2, open the WDS function Scan Route 1 then join (Route 1 do not need to open wds)

3, routing 2 of the SSID name custom

4, channel and b/g/n mode to be the same as Route 1

All of the above routers DHCP do not have to change, are automatic allocation, do not listen to the forum above the nonsense, the above mentioned places do not have to change, the default can be.

Terminal (cell phone or computer):

Route 1 access to the Internet and the same way as the original automatically get IP on it, those who need to route 2 Internet access terminals must manually set the IP address, IP address to refer to the address of Routing 1 manual settings, as well as the gateway and DNS also have to manually set and to Route 1 of the same IP address.

This column more highlights: http://www.bianceng.cn/Network/wxwl/

That's how I got it done. Because Baidu saw a lot of asked about the success of the WDS connection, but not the internet posts, no one can effectively solve, so they send a post to help people in need.

Mimi inserts the post to add:

Because WDS technology is not standard, different routers have different settings, please set according to the actual situation, the following is Tengda no line by WDS set

The original text belongs to qz24045959 all, simultaneously corrects:

Today, I used two Tengda routing mode, debugging success. But it's a little different from the way I used to tplink. Both Route 1 (192.168.0.1) and Route 2 (192.168.0.2) must open WDS and scan each other to join. Routing 1 to network, routing 2 must be turned off DHCP, the IP address pool of both devices is 192.168.0. (100-150), and then other devices directly access the route 2 can be automatically access to IP Internet. Very convenient.

All of the above routers DHCP do not have to change, are automatic allocation, do not listen to the forum above the nonsense, the above mentioned places do not have to change, the default can be.