For small networks, for the convenience of work, generally use wireless broadband router to achieve network sharing, so that desktop users, notebook users can fully facilitate the enjoyment of the network convenience. But wireless networks are prone to signal instability and disconnection during use. Generally speaking, when this happens, people will turn off the router reboot. In fact, do not need this to be troublesome, we can completely from the software and hardware two aspects, so that the disconnection line by the work again.
First, troubleshooting hardware failures
For the general Small Network, the general low-end wireless broadband router can meet the demand, but this brings some drawbacks to stability. Therefore, the more frequent automatic disconnection, should first check the hardware equipment work. Focus on checking the working environment of the equipment, whether the signal is disturbed, whether the cable network work is normal, especially in the summer temperature is too high and so on, these are the focus of inspection. Because of high temperature, signal interference will affect the network signal, especially the wireless signal has a greater impact.
Second, troubleshoot software failures
Software failures are generally caused by viruses. When the client has a large number of worms, ARP virus and so on, it will produce a large number of virus data closed device port, so that the equipment at full load working state, or even panic. For this, generally only need to carry out virus killing processing can.
For software failure, there is also a reason for the problem of parameter settings. Many broadband routers have "on-demand" option, that is, automatically detect requests to access the network, in the set time if no request, the network will automatically disconnect. So you can check to see if it's a problem with this option, and if so, set it to "Auto Connect" so that you don't get disconnected after automatic disconnection.
General low-end broadband wireless routers, in use as long as the attention to the method, do a good job of basic maintenance, then it is more suitable for small office LAN use, there is no need to buy high-end equipment.