Solve the problem of unstable router wireless relay connection

We all know that some of the tp-link or D-Link router has a wireless relay problem, the normal router does not have a relay function can be used by their own brush system to make the router has wireless relay function, but this wireless relay function may be less stable, There is a problem with long-time connections to the relay router and the inability to obtain an IP address.

How can we solve this problem?

In fact, it is very simple, by modifying the wireless settings in the main router is called "channel" settings, the general default is "Automatic channel", you need to manually set this value to the channel value range of the median value (if the value range is 1-13, then should be a value of 6 or 7) can be.

Most people are not quite sure about the effect of this thing. Their own summary is as follows, said the wrong people forgive me:

Set to Automatic channel

The advantage is that the router's signal can be transferred farther and has a stronger ability to pass through the wall.

The flaw is: the signal is not very stable.

This value can also be set to Manual channel, set to manual channel

The advantage is that the device can have a more stable connection

The flaw is: the ability to wear walls and transmission distance will be discounted

Solve the problem of unstable router wireless relay connection