Specific Configurations of the vmwarevm NAT Mode

Specific configuration of the vmwarevm NAT mode: the VM can access the Internet and access other computers in the network of the host computer (otherwise not ). 1.1.1. view the network parameters of a VM. 1) Open the VM and select "edit"> "Edit Virtual Network", for example, 2) Select "VMnet8 NAT" in the list ", click "Restore Default" in the lower left corner to restore the default parameter settings. Click "NAT Settings", for example, 3) record the subnet IP address of the virtual network: 192.168.52.0 and the gateway IP Address: 192.168.52.2 1.1.2. set the virtual Network parameter of the physical HOST 1) Open the Network connection of the physical host, find "VMware Network Adapter VMnet8", right-click Set Properties: 2) set the virtual Network IP address of the physical Host: 192.168.52.X, X in 0 ~ 255, but not the same as the subnet IP address of the above virtual network. The subnet mask and default gateway are consistent with the subnet mask and gateway of the obtained virtual network. DNS can be set or ignored. If set, you can use google's free DNS: 8.8.8.8 and 8.8.4.4. 1.1.3. Set the network parameters of a specific Virtual Machine. 1) Open a specific virtual machine, locate the network connection, and set it. 2) set the network IP address of the Virtual Machine: 192.168.52.X, and X in the range of 0 ~ 255, but it cannot be the same as the subnet IP address of the above Virtual Network and the network IP address of the physical machine. The subnet mask and default gateway are consistent with the subnet mask and gateway of the obtained virtual network. DNS can be set or ignored. If set, you can use google's free DNS: 8.8.8.8 and 8.8.4.4. If there are other virtual machines, you can perform the same settings.