Steps for upgrading the Alpha Router

This article describes the downloading and upgrading steps of the Alpha router, as well as some experiences from netizens using the Alpha router, such as precautions for downloading BT and how to increase the network speed.

AFR-G3 Alpha router upgrade version to solve the problem of love dropped

1. ALPHA router upgrade objects: ALPHA G3, ALPHA V3/V3 + must be software version for the R01-020 product. The power indicator on the right cannot be upgraded using this software package when facing the front panel)

2. Alpha router upgrade process:

◆ Step 1: Download the upgrade package. The Alpha router upgrade package downloaded here is compressed by winrar because the forum requires this). Use winrar3. For versions above 40, I used this version for compression) decompress and get a file named WLAN_Router_025_0310, which has no suffix.

◆ Step 2, login G3 WEB page, go to "System Tools" ---- "software upgrade", on the right of the page shows the current system version is R01-020, this upgrade package can only be used for this version. Click the Browse button, find the decompressed upgrade file WLAN_Router_025_0310, and click upgrade below ". Wait a few minutes, but in less than one minute.) The upgrade is successful. The vro automatically restarts.

◆ Step 3, again login G3 WEB page, enter "System Tools" ---- "software upgrade", in the right side of the page shows the current system version is R01-025, Alpha router upgrade successful.

3. Note: If you have any questions during the upgrade process, Please carefully read the above upgrade instructions and carefully read the product instructions.

G3 experiences, including some experience on BC

I purchased the G3 router on the 19th. Some of my experiences after I bought it are as follows: At first, I set the TCP/IP protocol according to the general routing settings, however, the machine cannot access the network. It is very depressing. It is better to restart the route. I don't know what's going on. The most troublesome issue is that the 025 version is frequently suspended, and you do not know whether it is a routing problem or other problems. So I found this official website and found 1 in the download. 33. Upgrade.

Download the direct Alpha router upgrade file. BIN, enter the route, and upgrade. I did not succeed for the first time. I checked the software version, but it was still 025. I clicked it again. This time I got OK. When I accidentally found this forum, I came in and saw a lot of problems related to hanging lines. I tried to set the IP address validity period to the maximum. As a result, after 2 days and 17 hours of operation, no cabling has been performed, and you do not know whether the route is upgraded or the IP address duration solves the problem of cabling. It is still being tested.

PS: When I log on to the route, some netizens reported that the login box would jump out twice. So did I. I accidentally clicked it again and then went in. Note: There is a login box. After saving the password, the star with the password is displayed for each login. But after clicking OK, a login box is displayed, with no password, usually someone will enter it again. In fact, just click "OK" to enter the password. That is to say, the login route points are determined three times. I hope our staff can reflect the problem with software development and fix the BUG.

The following is a question about BT download.

I use BC (BITCOMMET). I don't know much about other software, and it may not be applicable to all of them. At the beginning, I used BC to connect users without a remote connection. I read many posts on the Forum and made it clear that the routing settings are the problem. First, start with the firewall and turn off all firewall-related settings. I personally think that the firewall that comes with the route is useless, and BC still cannot connect to a remote connection. I have posted a post on the BC website forum, I am not very clear about the port ing. I wrote a port: 25000 in the port listener in BC according to the method in the forum, and then set the port in the system.

I am using SP2 XP. In the firewall settings in the security center, click the exception tab and there is an UPnP framework in it. I checked it and deleted all the above options about BC. (For example, what software, port, TCP, UDP, etc., delete only those related to BC) then set the route, log on to the route, and in the virtual server used for NAT settings, add the port that was just written in BC. My port is 25000. Note that this must use a fixed Intranet IP address, and add two ports. The preceding ports are the same, one is TCP and the other is UDP.

(ENABLE is enabled by default.) Select UPnP settings and click Save. (The firewall of the route is disabled.) When BC is enabled, the system firewall will pop out a dialog box and select "unblocking". After you try to download it, you will find that there is a remote connection and a speed. I use 0. For the 77-version BC, the bandwidth is fiber-optic, 512 K-2 M, requiring Dial-Up, And the download speed can reach around 210. A little bit of experience, friends in need for reference only. If you have any questions about the upgrade of the Alpha router, I will help you solve the problem.