Taixing-kun tells you the composition and structure of the centrifugal fan

Jiangsu Province Taixing Environmental Protection Machinery Co., Ltd. specializes in the production of industrial fans, including centrifugal fan, boiler fan, dust blower and so on! Welcome to Inquire! The composition of the centrifugal fan is described below:
1. The composition of the wind turbine:
The fan adopts a single-suction D-type transmission structure, which is connected by a coupling fan and a motor. Fan main body mainly by the chassis, Air inlet, Rotor group (impeller and spindle), bearing box, coupling and other parts. (F-type transmission It is a double support two bearing box, single suction has a inlet chamber, double suction has two inlet air chamber. C, the B-type drive has the active wheel and the passive wheel).
Unit in addition to the fan body, according to user needs, can also be equipped with a variety of external support, common are: motor, regulating door, the overall support, electric actuators, muffler and so on. The scope of the complete set of supplies according to the needs of different users and easy, specific scope of supply according to the contract.
2. Introduction to the structure of the fan:
2.1 wind turbine can be made into the two types of straight or reverse: from the motor one end of the face, such as the impeller clockwise rotation called the cyclone machine, in order to "shun", the counter-clockwise rotation called the headwind machine, with "inverse" expression.
The outlet position of the blower is indicated by the export angle of the casing: "Shun,,,," inverse, can be made 00, 450, 900, 1350, 1800, 225 "a total of six angles. Other special angles can also be made according to the requirements of the user.
2.2 impeller
For fan impeller, according to the different working conditions (the concentration of dust in the gas, particle size, and hardness of different), the impeller to take the wear-resistant measures are different, but also in accordance with the special requirements of users (the contract) to use special wear-resistant materials and measures. All welds undergo a rigorous nondestructive testing, and the impeller undergoes a dynamic balance correction, providing a reliable guarantee for safe and smooth operation.

2.3. Bearing Box
According to the specific situation, the bearing box has the following two kinds
1) Natural cooling bearing Box
2) Water cooled bearing box
3) Natural cooling grease bearing box
4) Water cooled grease bearing box

Taixing-kun tells you the composition and structure of the centrifugal fan