How to assemble the computer has become more and more computer DIY enthusiasts to relish a skill, for the computer rookie, how to learn to assemble the computer has become a DIY ranks of the first threshold. So, what knowledge and skills do you need to learn how to assemble a computer? Computer Configuration network In this article will give you a detailed explanation.
In this article, we'll introduce you to the entire process of assembling your computer. You'll learn how to choose the parts you need, how to buy them, and how to assemble them together. After the whole process is complete, you will get the computer that fully meets your needs. Well, let's get started.
One, ready to install the tool
Installed is not complicated, with the following 3 tools, loading machine to be more handy.
The screws used in assembling the computer are cruciform, preferably with a magnetic screwdriver for easy absorption.
2. Beak Pliers
Sharp-nosed pliers can be used to break some of the hard material behind the chassis of the baffle, can also be used to clip some small screws, nuts, jumper caps and other minor parts.
3. Thermal silicone Grease
When installing the CPU, thermal grease is essential. Use it to fill the heatsink with the CPU surface gap, better help cooling.
Second, installation considerations
Computer accessories are more delicate, the body with static electricity will cause great damage to them, such as internal short-circuit, damage. Before assembling a computer, you should touch a good grounded conductor with your hands and export the body with static electricity. or wear insulated gloves for installation.
If the moisture attached to the computer parts of the circuit, it is likely to cause a short circuit and lead to damage to accessories.
Be sure to prevent rough movements when assembling a computer. Because the computer parts of many interfaces have anti-insert anti-stick design, if the installation location is not in place, coupled with excessive force, it is possible to cause the broken parts or deformation.
Third, start machine
The first step in learning how to assemble a computer is to determine what type of computer you want to assemble. Do you need a computer that is quite inexpensive for your child to use? A small computer that can be placed in the living room and used as a media computer for less noise? Or is it a high-end game with a computer? Or maybe what you need is a powerful computer with a lot of disk space available for video editing. These possibilities abound, and the type you choose will dictate the many decisions you make later. Therefore, from the outset, you should be aware of the use of computers. This is very important.
Let's say you want to assemble a powerful, video-editing computer. You want it to have dual-core CPUs, high-capacity RAM, and disk space capacity up to 1000G. You also want the FireWire (FireWire) connector to be assembled on the motherboard. To meet these requirements, you need to look for motherboards that support the following configurations:
Dual-core CPUs (Intel or AMD)
At least 4G of high speed RAM memory
4 (or more) SATA hard drives
FireWire connection (maybe both before and after the chassis)
All parts are then placed inside the chassis, so the chassis capacity must be large enough to place multiple hard drives and ensure airflow to prevent overheating.
No matter what kind of computer you assemble, knowing the type you want to assemble can help you make decisions.
Motherboard is the key
Selecting a motherboard is the most interesting part of any computer assembly project. The reason for this is that there are hundreds of kinds of motherboards to choose from, and each motherboard has its pros and cons.
An easy way to select a motherboard is to divide them into several categories. For example:
Cheap motherboards: These motherboards are usually priced below 50 dollars and are suitable for older CPUs. If you want to assemble cheap computers, they are an excellent choice.
Midrange motherboards: Prices range from 50-100 of dollars, compared to inexpensive motherboard slightly. In many cases, the motherboard and CPU assemblies can be purchased within this price range. This is another good way to assemble a cheap computer or a cheap home/office computer.
High-end motherboards: If you want to assemble a powerful gaming computer or video workstation, these motherboards can provide the speed you need. Their prices ranged from 100-200 of dollars. They can be compatible with the latest CPU chips that run at maximum speed.