The Nero burning software, which is produced by a German company, is very powerful and easy to operate, and is suitable for use by various levels of users. There are many netizens who don't burn system discs. Let me teach you how to burn system discs.
Using Nero to burn system mirroring requires the following basic conditions:
1. System Mirroring
System mirroring is the ISO file you downloaded back
2. Nero Burn Software
You need to install the Burn software (Nero burning software) on your computer to use Nero to burn system mirrors.
Download Address: Http://dx4.haote.com/nero8_asian_lite.zip
3. Blank Disc
A blank disc is required to burn system mirroring.
4. Burn the optical drive
Your computer needs to burn the optical drive, burning the optical drive is the most basic condition of the system image is also necessary conditions!
Make sure you have all of these basic conditions, and then we can go into the burn.
There are two burning interfaces after you start Nero software
The first, Nero Express burning interface. The first time you start Nero, the following interface will appear Nero Express as [Figure 1]
[Figure 1]
Some friends may use another interface Nero Burning rom more, we can click the expand button--> switch to Nero burning ROM [E] to switch. As [Figure 2]
[Figure 2]
The second, Nero burning Rom burning interface. After switching, we'll see Nero Burning ROM interface as shown in [Figure 3]
[Figure 3]
Let's start by learning a simpler way to burn system discs, which is to burn system discs through the first Nero Express burning interface
The first step is to put the blank disc in the burner.
The second step is to launch the Nero Burn software into the Nero Express burning interface.
Third, click the image, Project, copy the--> disc image, or save the item into the following interface. Locate your system's disc image (ISO file) and select it by double-clicking it. As [Figure 4]
[Figure 4]
In the fourth step, after selecting the System CD image, click on the Extended button to enter the burn settings interface, and make the relevant settings as shown in [Figure 5]
[Figure 5]
Write speed [Figure 5] 1 not too fast DVD recommend 8x; CD recommendation 24x or below.
If you have several burners, you can select the one you want in the current burner [Figure 5] 2.
Note Writing to the Radio box [Figure 5] 3 to check, the default is to check, here you will erase the default.
If you want to burn a lot of copies to relatives and friends, you can set the number of burn copies here. [Figure 5] 4
Check the disc data to verify that your disc has been burned successfully. [Figure 5] 5
The fifth step, after setting, we can click to burn [a] [Figure 5] 6 this button to burn.
[Figure 6]
The optical drive will automatically eject after the burn is complete. If your system image is not faulty and the burn process is not wrong, then you can use the disc you have carved to install the system you like.
Interested friends can take a look at the second, Nero burning Rom burning interface
The first step is to put the blank disc in the burner.
Step two, start Nero burning software into the Nero Burning Rom burning interface.
In the third section, click the burner--> burn image file into the following interface. As shown in Figure 7, locate your system disc image (ISO file) and select it by double-clicking it.
[Figure 7]
[Figure 8]
Step fourth, after selecting the system CD image, go to the burn compilation interface and make the related burn settings.
[Figure 9]
It is recommended that you change the write speed, and the rest is done by default. As [Figure 9]
CD Write speed recommended 24x or below;
DVD write speed recommended 8x.
In the fifth step, click the Burn [A] button to enter the burn interface burning system disc. Tick the checksum write data.
[Figure 10]
The optical drive will automatically eject after the burn is complete. If your system image is not faulty and the burn process is not wrong, then you can use the disc you have carved to install the system you like.