Ten rules for extending the life of a laptop's optical drive-hardware maintenance

One, keep the optical drive, CD-ROM clean

The optical drive uses a very sophisticated optical component, and the most feared is dust pollution. The dust comes from the whole process of loading and exiting the disc, and whether the disc is clean or not is directly related to the life span of the optical drive. Therefore, the CD-ROM in the optical drive should be necessary to clean, not to use the CD should be properly kept to prevent dust pollution.

second, regular cleaning and maintenance of laser head

Light driven after a period of time, the laser must be infected with dust, so that the CD-ROM drive ability to decline. The specific performance is slow reading speed, display screen and sound mosaic or pause, when serious can be heard CD-ROM drive frequently read the sound. These phenomena have damage to the laser head and drive motor and other parts. Therefore, users should regularly light drive for cleaning and maintenance or to ask professional maintenance.

third, keep the optical drive horizontally placed

In the process of machine use, the optical drive to maintain horizontal placement. The reason is that the disc in the rotation of the center of gravity as a result of uneven changes in the light can reduce the ability to read the disk, serious damage to the laser head. Some people use computer optical drive to install software on different machines, often remove the optical drive to take, even carry, this light drive damage is very big. The damage is the optical components in the optical drive, the laser head due to vibration and tilt placement changes, resulting in the performance of optical drive down.

develop the habit of taking the disk in time before shutting off the machine

Once the CD-ROM is available, not only will the computer start with a very long read disk time, but also the CD-ROM has been at a high speed rotating state. This not only increases the working time of the laser head, but also makes the motor and transmission parts in the optical drive wear state, virtually shortening the life of the optical drive. It is recommended that users should form the habit of removing discs from the optical drive in time before shutting down the machine.

v. Reduce the working time of the optical drive

In order to reduce the use time of the optical drive to prolong its life, the user who uses the computer can make a virtual CD-ROM on the hard disk when the hard disk space is allowed. such as teaching software, game software, etc. stored in the hard disk, so that you can run directly on the hard disk, and has a fast characteristics.

Vi. use of pirated optical discs, use of genuine CD-ROM

Many friends because of the price of pirated CDs and genuine CD prices have a certain gap, plus the content of the CD-ROM purchase and use, based on China's national conditions, this is beyond reproach, but because your optical drive long-term read pirated discs, due to the poor quality of their platters, laser head needs to read data repeatedly. This increases the working time of the motor and the laser head, thus greatly shortens the service life of the optical drive. At present, the price of genuine software has fallen considerably, some are only slightly more expensive than pirated software, and CD-ROM drives have been guaranteed. Therefore, we suggest that we try to use less pirated optical discs as far as possible in the future.

Seven, correct open, close the box

No matter which type of optical drive, the front panel has a box and the key off the box, the use of this key is the correct way to switch the CD-ROM. When the key is pressed, the finger cannot be too hard to prevent the key from losing control. Some users are accustomed to hand directly back to the disk box, this light drive gear is a kind of damage, recommend users to overcome this bad habit.

Eight, the use of procedures to open, off the plate box

Using the program to carry out the switch disk box, in many software or multimedia playback tools have such a function. If you right-click the disc letter in Windows, the pop-up menu also has a pop-up command that pops up the disc cartridge. Computer users are advised to use the software to control the open and close the box, so as to reduce the failure rate of optical drive.

Nine, cautious and careful maintenance

As the optical drive in all parts are very sophisticated, users in the process of taking apart and installing the CD-ROM must pay attention to the way and method, pay attention to record the original fixed position. If you are not sure, please professional maintenance personnel to dismantle and repair. In particular, the aging of the laser, need to adjust the driving power to improve the power of the laser tube, we must please professional maintenance personnel debugging, in case they adjust too large, so that the laser head burned.

10, as little as possible to put the DVD

This can avoid the optical drive for a long time to work, due to long time optical drive reading disk, optical drive life is greatly affected. Users will need to play the program frequently, preferably by copying it into the hard drive, to ensure that the optical drive longevity. If you do often want to watch DVDs, it is recommended to buy a cheap, low-speed optical drive designed to play VCD.