Connect the incoming network cable to the WAN port of the router, find a short network cable, connect to the computer, and connect to any interface of vro 1/2/3. The wiring method is as follows:
Note: the normal working status of the router is SYS flashing, the WAN port is always on or flashing, and the port connected to the computer in the 1/2/3 port is always on or flashing.
Set the local connection IP address on the computer to"
Automatically obtain the IP address"
1. Right-click"
Network neighbors", Select"
Attribute": The Win7 system automatically obtains the IP address. Click here.
Click here for Win8 to automatically obtain the IP address
2. Right-click"
Local connection", Select"
Attribute":
3. Double-click"
Internet Protocol (TCP/IP)":
4. Record the IP address of the current computer and select"
Automatically obtain the IP address""
Automatically obtain the DNS server address", Click"
OK":
1. Enter:
192.168.0.1Press the enter key and click"
Static IP"
Why can't I open 192.168.0.1? Click this link
After the settings are complete, you can browse the web page.
Tip: If other computers need to access the Internet, directly connect the computer to any idle interface of vro123, and change the local connection to automatically obtain the IP address by referring to step 2.
No need to configure the router.
1. If you can access QQ but cannot open the webpage, manually set the computer's DNS to 8.8.8.8
XPSystem specifiedIpAddress:
Step 1: Right-click"Network neighbors", Select"Attribute"
Step 2: Right-click"
Local connection", Select"
Attribute"
Step 3: Double-click"
Internet
Protocol (
TCP/IP
)"
Step 4: Select"
Use the followingIPAddress","Use the followingDNSServer address"OK.
Windows 7
System specified
Ip
Address:
Step 1: Click the network icon in the lower-right corner of the desktop to open"
Network and Sharing Center"
Step 2: Click"
Change adapter settings"
Step 3: Right-click"
Local connection"Select"
Attribute"
Step 4: Double-click"
Internet
Protocol Version
4
(
TCP/IP
)"
Step 5: Select"
Use the followingIPAddress","Use the followingDNSServer address", OK.