1.
set up wireless bridge before you must know the superior WiFi signal security mode, encryption rules, keys (this is very important!) )
2.
Find a network cable, one to connect the computer, a router 1/2/3/4 any interface
The first step: Configure the computer's IP address
Step Two: Configure the router's Internet access mode to DHCP
Step three: Scan for WiFi signals that require relaying
Step Fourth: see if relaying succeeds
1. Right-click on the desktop "My
Network Places ", select "
Properties "
2. Right-click "
Local Connection " and select "
Properties "
3. Double-click
Internet Protocol (TCP/IP)
4. Select "
automatically obtain IP address ", "
automatically obtain DNS server address ", OK
1. Enter in the browser:
192.168.0.1 Press ENTER, enter the password in the jump page
admin click "
OK "
2. Click on "
Advanced Settings "
3. Click the "
Wan Settings " selection mode for "
DHCP", determine
Click on the "
Wan media type " scan to add WiFi signals that require relaying
If the Wan port status displays "connected," the relay is proven successful.
