Because Tengda customer service informed, Tengda router WDS will be compatible with this situation, then we can not solve the problem of WDS other router products.
1, first of all, we enter the router Settings page, is generally 192.168.0.1 in the homepage to change a wireless password, of course, you go to the advanced settings to change the wireless password is also possible. (Our main router is tp-link its LAN address is 192.168.1.1, we this tengda is 192.168.0.1 so I do not change LAN, because they are not conflict between two)
2, click Advanced Settings and then on the home page we can see the WAN media type, in the Advanced Settings home page has a WAN media type!! This inside point open we can choose this router's access mode, is wired or wireless access.
3, because we want to do is wireless bridge is also WDS, we have to choose wireless WAN access. We click on the WAN media type, select the wireless Wan, and click Start Scan.
4, after the beginning of the scan will appear next to our home, near all the wireless router signal, we find our main router to connect. (Please turn off the DHCP feature of this route before you connect)
5, we want to set the main router channel 1, password set to such as 123456789, encryption mode set to ASE, so as to facilitate our input of course can also be set to your own favorite password oh
6, and then we want to fill in the channel password, we should pay attention to the Tp-link router is our main router to maintain consistency. Then we click OK to save and start the router again.
7, the parents are still waiting for what quickly try it, this alternative bridging WDS method is not very good, feel good support me.