Tengda router settings: bandwidth settings and wireless network rename

Bandwidth control for tengda vro settings

In the bandwidth setting of the tengda router, this article takes 2 m broadband as an example. The theoretical maximum download rate of 2 M bandwidth is 2 Mbps = 256KB, and the maximum uplink rate is 512 kbps = 64KB,

Procedure:

1) log onto the tengda router interface and click "Advanced Settings" in the upper right corner,

2) Go to the Advanced Settings page, click "bandwidth control", and select "enable bandwidth control.

Example 1: Set the download speed of a computer with an IP address of 192.168.0.100 to 80-90kb and the upload speed to 10-15KB.

First, add an upload rule, as shown in:

1. Enter the IP address 192.168.0.100 in the IP address column.

2. Select Upload as the speed limit direction.

3. Set the bandwidth range to 10 ~ 15

4. Check "enable"

5. Click "add to list"

6. Click "OK" to complete the setting of the upload rule.

Then add a download rule, as shown in:

Same as above

Example 2: Set the download speed of all computers whose IP addresses are in the range of 192.168.0.2 -- 192.168.0.254 to kb, And the upload speed to 20-30kb ..

Same as above

Change the name of the wireless network in tengda vro settings

Procedure:

1) log onto the tengda router interface and click "Advanced Settings" in the upper right corner,

2) on the Advanced Settings page, click "Wireless Settings" --- "wireless Basic settings" and change the SSID option to the desired wireless network name. We recommend that you keep the default options for other options .:

The following describes how to set the bandwidth and rename the wireless network in the tengda vro function. These two functions are easier to operate on in route settings.