Tengda Tenda Wireless Router set up after the network, how to do?

Router Setup completes, still can't get on the net, how to do?

At this point, you can go to the Router Setup page (192.168.0.1) and click on the " Advanced Settings " in the upper-right corner-" System State " based on the connections shown at the WAN port

State to judge one's own problems.

The connection status has the following three kinds:

　　Question 1: How do i show " Connect "?

　　reason 1 : Network selection error for router WAN port.

Workaround: Go to the Router Settings page and click "Advanced Settings"-"WAN settings" to choose the right way to surf the internet. >> Tengda Tenda Wireless Router Internet access mode How to choose?

　　reason 2 : Broadband account and password is wrong or not case-sensitive

Workaround: Enter the correct broadband account number and password, and note that the password is case-sensitive.

　　reason 3 : Internet access mode for automatic acquisition, the router WAN access to IP and router LAN port IP conflict

Workaround: Modify the router LAN port address. >> How do i modify the LAN port address?

　　reason 4 : Network Broadband operators bind the broadband account and the computer MAC address

Workaround: Clone the MAC address on a computer that does not connect to the router's normal internet access. >> Tengda Tenda How does a wireless router clone a MAC address?

　　reason 5 : The long broadband line in the household leads to insufficient driving capacity

Workaround: Modify the router WAN port speed to 10M Full-duplex. >> Tengda Tenda How does the wireless router modify the WAN port rate?

　　Question 2: What to do if you show " not connected "?

　　reason 1 : Line connection error (the network cable connected to the WAN port is not wired or mistakenly attached to the LAN port)

Workaround: Check that both ends of the network cable are connected to the correct port and are plugged in (when the line is connected correctly, the WAN port LEDs on the router should be illuminated steady or blinking).

　　reason 2 : Cable quality is too poor or damaged

WORKAROUND: Replace a new network cable (make sure it's good).

　　reason 3 : Insufficient driving capacity

Workaround: Modify the WAN port rate to 10M Full-duplex. >> Tengda Tenda How does the wireless router modify the WAN port rate?

　　Question 3: Show " connected " but not the Internet, how to do?

　　reason 1 : The wrong way to choose the Internet in the router

Workaround: Go to the Router Settings page 192.168.0.1 and click "Advanced Settings"-"WAN Settings"-Choose the right way to surf the internet. >> Tengda Tenda Wireless Router Internet access mode How to choose?

　　reason 2 : Computer IP address is not changed to automatic access

Solution: Change the computer's IP address to automatic acquisition. >> How do I get an IP address automatically?

　　reason 3 : The computer's Domain Name server error (DNS) (to be able to QQ, can not open the Web page)

Workaround: Manually Specify a local connection DNS of 8.8.8.8. >> How to assign an IP address to a computer?